change

Hey i am thinking about buying this bike but i dont even know what it is. Any can identify please? Is it possible to switch the wheels on this so that it can be short and put the gas tank on the bottom where the engine is?

Anyone had any luck doing a sprocket swap to make it easier to work with clutches? I want to use an adjustable clutch such as the GL's but dont think they sell #41 gears for them.

I have a doodle bug that needs new tires how do you get the old tires off the rim? Do the tires have tubes? How do you get it all back on? Dumb question probably but I've never done it before thanks

Not much of a DIY but we need to start somewhere, if you have a DIY start your own thread so we have a list to go by....include detailed info as well as some pics. This isn't much as I said, some of you guys probably already have one but the name of the game is sharing info. Replace your oil...

Thought I'd post this in case some else with one of the new DD's runs into this. I went to do the first oil change in my daughters new baja dirt bug (new type). When I unscrewed the oil drain I found they did not leave enough clearance to fully remove the drain plug. When you go to back out...

Just oil change on the manco

I searched and didn't find the results I was looking for. Can you drill the jet on a pulsajet carb and not ruin it? I can't find anything about doing such. I'd like to do this instead of looking for a raptor carb.

i want to put a bigger gas tank on my 5hp briggs it has a tank under the carb and i was thinking about putting a smaller motorcycle gas tank on does any one ever done this and how do i know what size carb i should be looking for

hi a local shop wants $100.00 to change my Tecumseh h 35 rings. and i hope hone. i must supply the parts! he said time is expensive. how long will this take a :PRO:? 30 min? i could take it to the mercedes dealer they are only $90.00 an hour labor.

Hey all been using search and have found nothing about how to change the clutch on a stock doodle bug. I already have replacement clutch ready and as the weather is now so nice I want to get started but am not excatly sure how to do it any advice would be greatly welcomed. Marty

Only $250,000.00 honda mini trail collection luke owen wilson

The drain hole isnt in a good spot.so whats your method?siphon?

Hi, this idea came to me this morning, trying to figure out how to homemake something to change gears without a TAV or 2 speed. I drew a picture, if anyone can add their thoughts or ideas, then lets get it made. :smile: Don

Strigoi has the guy that flips out, and dude has his Boing flapping it's wings.. and I got a cool one if it will work.... But I'll be damned if I can figure out how to edit any of it... I clicked the "edit profile page" or whatever that one red link is but that does nothing really.. I have got...

can you change the grips on the doodle bug or does that require you changing the throttle? also how would i go about getting or making a exhaust the will extend to the rear of the bike? im getting tired of my pant legs smelling like exhaust any one know of any good mini bike magazines?

I was wondering what your service intervals are for changing your oil in your Doodlebug? So I could know the right time to do so also. I also use Royal Purple full synthetic oil, so that should lengthen my time change intervals. Thanks

I have changed flywheel, added a 252 cam from nr. 22mm mikuni. changed the rod and want get a head to run my 1.3 rocker that I got with my kit. I want to get a smaller head thats been machined for more compression but unsure of what would be best for my set up. does anyone have a good link to...

You guys make it easy to be a n00b. Thank you. I'm going to try and do this without pictures. My bike has no top end apparently due to about a 10:1 final drive ratio. There's a 2:1 gear reducer attached to my actual chain drive. It's not a jackshaft. Can I change the rear gear on the...

My nephews 5hp flathead needs a new valve guide, I started drilling the old one out a step at a time increasing bit sizes, I've got the guide super thin but I still can't get the rest out.... Is there a drill bit with a guide pin to drill these out or another process?? Any help or tips will...

Does anyone have cross referance for the chinese plug that it comes with. Champion,ngk or whatever works best. Its starting to backfire getting off the trottle,when my xr250 would start that id change the plug and it would stop that and run better.Granted a plug in my XR would last a year or 2...