chinese

I bought this flattie last year for $30. It ran; barely.... Removed governor, Ported and Polished, and added a header pipe. Upon cleaning the stock gas tank, it broke ( the little bowl that the short pickup tube pulls gas out of). I got the idea and plans (from a fellow DIYGK member) to use a...

Chinese tav. New in the box. Unopened. $130 shipped from Grandville michigan

Hey guys, I drained all of the factory filled oil from the crankcase of this new hemi 212, filled with 10w30 and ran it for a few minutes to warm it up. Then my Hot Rod neighbor (who is jealous that my minibike spanks his minitrail) came over and wanted to try it out and as he went past...

Got another beater roller if someone is interested. $50. Has desirable 4" rims on it. A bit tweaked up but nothing too bad. Has Chinese caliper on it.

Found these old lug nuts in some of my stuff. All most positive they was from my 64 corvette. NOS Appliance 7/16x20. Complete set except one wheel lock missing. I have had these for over 30 years. Not :chinese: junk. Maybe some of you car buff's would be interested. $50.00 plus $6.00...

Just wanted to post a project I am just about done with. This was originally an Eton Viper with a 70cc engine(or was it 90?). Album Link Things I did: -Remove old 2stroke engine, wiring crap -Added your garden variety Harbor Freight 212cc predator engine -Hilliard Extreme heavy duty clutch...

Looking for a Chinese "Honda clone" engine. 110cc -140cc. Will buy a whole pit bike to use what I need if local. New lifan minus exhaust would run me $300 shipped. SO that's my budget.. for a complete running engine. Shipped to zip 48867, mi

a couple of pallets shipped from henan chuangshi to me yesterday. they had some spare room on a pallet so they gave me one of these to play with: it's a good thing they put "Diesel Engine" on the label, might have tried to use it as a bbq or something:thumbsup: Henan Chuangshi 5.5hp...

I was just given a surface grinder from my work, & need to power it. I have 220 single phase, I need 220 3 phase @4 amps. I'm looking at this... Chines VFD I don't need to control speed, reverse, ramp up/down, etc. etc... I just need 3 phase to a 1 hp motor. Any experience here :shrug...

Curious what you fellas think about using modern aftermarket off shore components for restorations and rebuilds? Being a bit long in the tooth I am on a quest to use only USA made pieces parts. Am I alone on this? Looking for a sanity check :thumbsup: I am 50 ish... John

As many of you may or may not know, Chinese ATV's are poo... Ours broke down, died, and never wanted to spend the money to repair them for how low quality they were. Instead, I got the bright idea of stripping the motor, welding on some motor mounts and putting a 212cc Predator engine in...

recently recieved a cheap 110cc chinese atv from my nieghbor and I plan on getting it running and throwing it on craigslist. I hooked up a fresh battery, turn on the ignition, and all I get is a click from the starter soloniod. Does this mean I have a bad solonoid, bad starter motor, or what? I...

Any extra info would be appreciated. I think the clutch is out on the green one and I have to install a small 171cc in the baja.

OK was in sporting goods store this morn (MC Sports), walking around , and came upon a FINE looking mini, chrome fenders, double chain adjusters, chrome handlebars, fat tires, SUSPENSION, this thing really looked OK, what I was wondering, are they worth the $329.00 price??:confused::confused...

A buddy of mine was given this for free. Runs, but needs a recoil and clutch. Any ideas? Thanks!

Anybody have any info on this? Sachs Saxonette engine, tank says Sundowner?

I have a 2012 with the stock engine. Is anyone running a Chinese TAV unit or I everyone running the TC1002 set up. Post your pics. Any thoughts?

I was working in my shop tonite , useing the drillpress and across the shop my milling machine started up on its own , ran for a bit then shut off , scared the shart out of me lol I walked over and checked the switch and it was in the off position so rather than be smart and unplug it I decided...

I am looking to get a tav2 for my mini bike and was interested in the chinese tav2s from ebay. I was wondering what your experience is with them and if they are any good. I am going to put it on a stretched cat with a predator 212 pushing about 12 hp. My mods include a 14 cc head, header, k&n...

Does anyone know who actually made or should I say distributed this style mini chopper or what its called? I would like to see if I can get some parts from one (for something else). Thanks