cobra

Looking for Elfenel Cobra front end parts.i have areal nice frame.someone put some extended forks on it.Thanks for looking.Elburro Brian.

Got this in a trade deal and suspect the COBRA decal, exposed a bit from the black brushed paint with thinner, is a prior owner addition. I searched and come up with an Efenel Cobra but this looks quite different. Did run across a Sears I thought was similar but can't find it again. Came with 6"...

I got this Lil Indian off CL awhile back, posted for 16 minutes!!! Lucky me!!! The previous owner stripped it down to bare metal, and was gonna paint it and put a different rear wheel on with a brake, but never got around to it. It's missing some parts, the seat and rear fender bracket were cut...

I have been looking for a few years to get a badge for my Efenel cobra if anyone has one or can repop one that would be awesome

Just picked up this (Panther?) Cobra III by American Leisure Ind. out of Philadelphia PA. That's all the info I have been able to find on it, seems there is not a lot on the web about these American Leisure bikes. It seems to be pretty heavy-duty, built very solid. 1" bars, fold-up foot pegs...

Has anyone seen a clutch like this before? I have not got the bike running so I don't know if it will function but I thought it was interesting. Thanks! Jason

Inquiring to see if another member can offer information on Efenel Cobra mini bike. My question is the engine original. It is a Clinton 4HP Pull start not kick start. Any info appreciated. Thank you. Pictures are posted under member galleries.

I came across a 1973 Cobra super striker today, I have never heard of one and wondered if there is anyone who may have some information about them. He is asking $1000 but it looks to be complete. Thanks for the help.

Short version: I have a mini bike frame that I believe is an Efenel Cobra. Long version: Here is my case. Someone please tell me where I'm wrong. I have done a TON of digging. I've read forums back to 2009: Efenel made mini bikes: The Cobra, their deluxe model, is constructed of...

Now thats old......on EBay BIN $300 Vintage Mini Bike Luther Old Minibike Frame Mini Trail Bonanza Taco Rupp | eBay

any body seen these bikes and there made in ohio i think i need one made in the usa?i was wondering who makes dirt bikes here and bam found these guys we need to support them what do you guys think?

Morini Franco Motor, but WHAT MODEL? Looks like a Cobra what IS IT? and what Year? Big question is what engine model is it? I need to buy a coil so i can get it running. Has 75psi cold. DVOM jumps From 0 to .6+vdc on Lead wire going to the coil when kicked, but no voltage after coil.

I got a line on both of these clutches. The Jammer Cobra is in a Bully basket - freshly rebuilt for 175. The MDC is rebuilt with one race on it for 100. For the following set-up what in your opinions is a better clutch/buy? .065 milled head 26lb springs 275 cam blueprinted 304wx...

can any 1 tell me about C25 Cobras i seen 1 at a repair shop and they want $250 for it is it worth it it does run has a 5.0 tecumseh full roll cage anits a 2 seater with 15 6 6 tires on it and seat belts no lights or any thing else and its black when i get a chance i will go back and take some...

Says Cobra on front plate but can't find any on the web like it