copper

  1. R

    Copper Head gasket for HM100

    Does anyone know a source for a Copper Head gasket for HM100? I am looking to get a little more out of my old Tecumseh
  2. oldsledz

    Briggs copper color

    Is there a good color match for the briggs copper color in a spray can?
  3. jackeo21

    2hp Briggs, Restoration

    Hi all, (sorry for all the threads :laugh:) Really wanted to do a thread on my 2hp. It's taken me a little over one week, to disassemble, clean and paint. This is the 30 dollar engine I brought at a swapmeet. For memory is a 73, 60102. It has a vaccujet carb. The motor is a copper colour, which...
  4. Sunset5523

    Copper color Briggs 3hp

    Hi are the copper color Briggs 3 hp steel bore?
  5. engine in frame

    engine in frame

  6. kawazukimaha

    Old Copper Colored 6.5 hp

    I've had this motor for 20 years. It was old when I got it! I had it on a go cart to ride with my son on his go cart. It always ran very good. Just been sitting in the garage, since I sold the carts. Is there an electronic ignition conversion available? The points are always a concern for tuning...
  7. L

    .016 copper hg on predator

    When I bought my arc flywheel I also bought the .016 copper hg but haven't installed it yet because some people told me that its just a PITA. Since I have it and its just laying around I decided to just try it and see what happens. Do I need anything special to install it like sealant?
  8. minibikin'

    3 or 3.5 Copper Briggs with flo jet

    Not sure what this engine is. Came on a Cat I sold. It is a copper colored Briggs and has a flo jet carb and metal tank. Turns over with decent compression. Tank is nasty inside. 3/4" tapped pto. Unfortunately the shroud was changed. $40 plus shipping or I will deliver to the NJ show in two weeks.
  9. patrick2260

    Vintage Copper Briggs and Stratton

    I've been acquiring some older copper Briggs horizontal shaft engines. 3 hp and 5 hp. So far they have either spark and compression or compression with no spark. I may be able to get some that run but in my opinion they would need work but could run and become a decent mini bike engine. I...
  10. Gustavo

    Good Deal On A Couple Engines Including A Copper 5HP Briggs

    Great Deal! Maybe he will ship them??? BRIGGS ANTIQUE 5HP MOTORS COPPER MODEL f $ 90 FOR ALL
  11. KustomKartKid

    1970 5 HP Vintage Copper Briggs and Stratton

    Selling off some of my "personal stash" of motors. These are all engines that I consider to be very nice and was saving for myself for future projects. They have all been laying for months to years so some tweaking/tuning should be expected. #1 1970 Briggs & Stratton 5 HP. Perfect...
  12. steven Durham

    Copper color

    Has anyone tried the new product a two step Copper colored paint system from Dupli-Color ? It might be a good paint choice for the Briggs Engines. They have a short video clip on using it on a chrome wheel. Steve :scooter:
  13. W

    1971 Copper 5hp Briggs Rebuild

    I purchased a 1971 copper briggs 5hp model 130202 from Minibikin. I am going to do a complete restoration/rebuild of the motor. I want this thing to look like it just rolled out of the factory in 71!!! I have al Here are pictures of what it looked like before being torn down. G]...
  14. minibikin'

    71 copper Briggs 5hp

    I have a 1971 Briggs 5hp in copper. I know very little about this engine unfortunately. Compression feels good and it appears to have a magnetron conversion. There is spark but no diaphragm in the carb?? Might be good for a Powell or other resto. $100 obo located in Pennsburg PA 18073. Possible...
  15. Richard Trotter

    Copper 8hp

    I had always wanted to build a motor with the old briggs copper color that was popular in the 70's. On the 'oldminibikes' forum, I heard about the Rustoleum High Temp Ultra 'Aged Copper' paint. I tried it and this is the result. The paint was thin and required several thin coats to make it...
  16. flpmurphy

    Copper stripping

    Don't know how many of you do this but i would get a stripper like one in pic. This stripper paid for itself in about an hr. Use to do it by hand and it sucked.
  17. The_Ruppster_86

    "American Muscle" ruppster's vintage Bonanza 1300 build

    Here is my entry for the 2012 OldMiniBikes Vintage Class Build Off. I will be using a Bonanza 1300 frame with a 5HP Briggs engine. This will not be a full restoration but not nearly all custom either. The heart of this build will be with the engine. The 5HP Briggs will be built for as much power and RPM...
  18. Scottessey

    Copper colored engine paint for a Briggs?

    Hey Fellas, I'm looking to paint a 5hp Briggs for a Powell. Do you know if Duplicolor or another brand carries a copper color in a high heat spray can?
  19. boston

    Copper Gaskets for Compression

    so my friend who races go peds and builds stupid fast motors that push 12k rpms:doah:, says that he uses copper gaskets which are half as thick as paper one for more compression, anyone ever try this on a clone with success? -boston
  20. Copper continental Rupp Mini bike

    Copper continental Rupp Mini bike

    I recently completed my restoration of a worn out Rupp Mid-1960s Continental. From my investigation I am guessing this about a 1968 Contental 350. If you have additional information, I'd appreceate hearing from you. Thanks, Chuck cconfar@gmail.com
Top