difference

  1. B

    Cat Slingshot difference X and X350?

    Can someone tell me the difference between a Cat X3 and a Cat X350 Slingshot? Did they come with options? Engine size options? Which is worth more the blue or green X3? Just curious Thanks in advance, Greg D
  2. BBQJOE

    Will advanced timing make any difference on a stock engine?

    If I have a stock engine (gov properly removed) will the billet flywheel with advanced timing change anything?
  3. james ackerman

    Difference between 11x3.50-6 and 4.10/3.50-6

    So just looking at these tires on ebay I can't notice a significant difference between them. Are they both interchangable on a 6 inch rim. I currently have 4.10/3.50-6 on my 6 inch rim. Will the 11x3.50-6 fit?
  4. C

    Difference in 212cc & 196cc predator engines

    I have several performance parts for a 212cc predator and would like to know what all the differences are between the 212cc and the 196cc Predator engines. I can buy a 196cc real cheep and would like to know if a flat top piston, non hemi cam, ratio rockers, 26# valve springs, retainers &...
  5. R

    Difference between 5.5 and 5hp flatheads

    I picked this 5.5hp flat head today for $40..... its a good runner. I ran the numbers and it's a 1998, plain bearing block. Decal says cast iron sleeve. What is the difference between this and a normal 5hp? Is the bore and stroke the same? Camshaft? Carburetor difference perhaps?
  6. ClipperBuggy

    Tecumseh Diaphragm Carb Difference

    Does anyone know the difference between the two diaphragm carbs? Part 631588 & Part 630884 The appear to be identical, but they must not be if there are two different part numbers. Could I use either on my 1968 HS40?
  7. xBrent92

    Ignition Timing Advanve make Big difference? Upgraded Camshaft.

    Question #1 If one bought an upgraded camshaft that gives good power at 24degrees ignition timing would they get even MORE power by advancing the timing 6degrees to the cam recommendation of 32degrees ? It gives real good power is it stands. But more torque/power is always appreciated if the...
  8. B

    What's the difference between the 631821 and 631820 carb

    Did a search and dint find the answer. Looking for a new carb for my h40 and jacks says the 621821 is the correct one but I can only find the 631820 for replacement. Is there a big difference between the to? Thanks.
  9. FloridaMiniBikes

    OHH Tec 5.5, 6.0, 6.5 difference?

    How in tarnation did That injun guy get different HP ratings from the same bore and stroke.:confused: I looked around the net and still am dumbfounded. Please enlighten me oh great ones?:anon.sml: Old ancient Mini-Bike proverb says..... Curiosity killed the cat, but satisfaction, brought...
  10. Sixpac440

    Tire size difference? 15x6.00x6 vs 530x450x6

    15x6.00x6 vs 530x450x6 Is there much difference? Where is it? Thanks Kevin
  11. motomonster212cc

    AZUSA frame with arctic cat front forks...

    So today I finally got to install a sprung fork front end on my AZUSA frame. Had to make a (3) 1/2" spacers, two for the front wheel, and one to make up the space difference between the triple trees. It makes all the difference in the world on ride quality. :thumbsup: PS. Not 100% sure if...
  12. Sixpac440

    Honda ES6500 Generator wont stay running ...

    The crank case was full of gas and oil. The gas had migrated from the tank to the crank. Changed the oil & filter. Removed the carb, pulled the float bowl, gently cleaned the jets with WD 40, air and a small wire. The bowl was clean when 1st disassembled. 1-1/2 gallons of fresh gas was put...
  13. J

    How good are the TAV knockoffs?

    Are the knockoffs as good as a genuine Comet TAV? Are they able to use Comet parts? Is the Comet worth the price premium over the knockoff? There is a huge price difference between Comet and the knockoff. There is even a huge price difference the knockoffs sold by different sellers. I...
  14. Broncco1978

    212 reg vs. 212 Hemi

    Is there really a huge difference between the two engines in stock trim?
  15. R

    H82 vs AH82

    Is there a difference between the H82 and the AH82 about 1960 model I thought they were both the same thing?? any one have any info on this? A guy said there is a difference in the ports in the jug? Thanks RC
  16. UnorthodoxCreat

    Assymetric Drive Pulley Sizing

    I was planning on using a TAV2 on my Gilson Restomod but it doesn't look like there is enough room with the jackshaft. My new plan is to buy a Comet 30 Series driver and driven pulleys and mount the driven pulley on the jackshaft. I see the driven pulley comes in 6" and 7" versions. Can anyone...
  17. FirePowerMinis

    Compensation for stroke difference in H-HS?

    I have an HS40 with a grooved bore, scored rod, and galling on crank. Can the block be bored to accept an HS50 piston? What I'm wondering, is, can an H40/50 crank be put in, bumping displacement even farther? Too wide?
  18. boostdoctor

    What's the difference between 9hp & 11hp gx340?

    I just picked up a 340 and it says 9hp. I assume this is a older model motor. What extra does the 11 hp motor have?
  19. trinik7597

    what is the difference

    hey OldMiniBikes , i am trying to come up with an economical drag engine and was wondering what is the difference between the animal and an intek 900 series 205cc ? are there upgrade parts available for the intek ? are these engines based on the same platform ? is the gov. removed from the animal from...
  20. V

    What is the difference between a Briggs 3hp and a "sport 3"?

    What makes them a sport model? Mine also has a Turbo Torque crank extension and clutch on it. I cannot find any information on it.
Top