flywheel

I have a Tecumseh 10hp engine. My question is "Is there any advantage to advancing the flywheel timing on this engine"? It is a late model engine with the mag above the flywheel.

Looking.. Thanks.

Hey guys, any of us play with the 2 - 3 Hp aliminum flywheel more less question of advantage or disavantage for the cast iron or this aluminum? We are building a 3HP for a mini bike as we speak and I have this question?This early Flywheel is early 50s with 4 leg coil,,Zippy with this lighter...

Will HS40 FLYWHEEL WORK ON HS50

is there such a thing??

looking for the last few parts to my build. In need of a billet con rod for a gx200 and a billet flywheel. Let me know what you have!

One of the differences difference between arc flywheel and plv flywheel is the shiny I know how to make them more shiner than arcs you get it chrome plated there you go that solves the shiny problems

I have a HS40 lighted coil and matching flywheel . This is the original flywheel and coil off the HS40 that came on my Powell challenger. Price 135.00 OBO

Looking for a solid state lighted flywheel for h50-h70 Tec...I can get a new lighted coil if you don't have one, I mainly need the flywheel..

I picked up a BearKat this past summer and finally got around to working on it. It's actually in pretty good working order aside from a stuck valve, but I'm going to go ahead and rebuild it anyway. However, I can't seem to get the flywheel off -- or rather, I can't seem to figure out how it...

Tecumseh lighting coil and flywheel??? Which Tecumseh motor does this go to? I was told that it came off of an HS40? The shaft hole is tapered and is smaller than 3/4". What year range and motors does this thing go to? Any help would be greatly appreciated. Oh, and I am doing this for a friend...

Tecumseh lighting coil and flywheel??? Which Tecumseh motor does this go to? I was told that it came off of an HS40? The shaft hole is tapered and is smaller than 3/4". What year range and motors does this thing go to? Any help would be greatly appreciated. Oh, and I am doing this for a friend...

Tecumseh lighting coil and flywheel??? Which Tecumseh motor does this go to? I was told that it came off of an HS40? The shaft hole is tapered and is smaller than 3/4". What year range and motors does this thing go to? Any help would be greatly appreciated. Oh, and I am doing this for a friend...

Arc Racing Clone PVL Billet Flywheel Karting Flywheel | eBay good deal on engine also, cheap shipping Kart Racing Engine Red Clone Engine | eBay

I.:) ave an h60 tecumseh that has electric start on. It the points an everything is disconnected the flywheel.has 2 :doah: fins broke off my.question is if I take the electric start of can I use a regular h60 flywheel if I cant find another one for the electric start an.I.don't.have a clue how...

I'm in the process of rebuilding this Clements H50 beast. I pulled the flywheel off for cleaning and to replace the seal behind it. When I did so I found that the billet flywheel has no key-way cut into it. I know Clements knows what hes doing but this seem off to me. I marked to position of...

What ya think..

I am looking to by a briggs billet flywheel or a raptor. Ley me know what you got.

My 212cc is making around 16hp and i know the billet flywheel has 8 degrees built in. Would it help or hurt my performance if i put a 2 degree timing ket in? That would make it 10 degrees advanced. Would i lose low end?

Hey everybody, First 56yr old newbie question regarding flywheel key problem that I cannot figure out:anon.sml: I had a spark problem on my H30 that required me to pull the flywheel to investigate. I traced it to a cut condenser wire that I fixed, but when I put everything back together, I...