gear

  1. Studeman68

    NORAM clutched reduction gear box- any info?

    I know these were used in some karting applications, but I cant seem to find any other info on it.. Anyone familiar with or ever used one? I'm thinking I may be able to use this on an upcoming project where space may be tight.. link is below.. Thanks... NEW NORAM REDUCTION GEARBOX 3.63"...
  2. md2020

    Gear ratio question

    Hey all, been a while since I've been on here. Winter time in the great Northwest and I had my Ruttman stored away. With good weather coming up, I've decided to "soup it up" a little. I already ordered parts, but I have a question. Will a gear ratio of 3.5 to 1 work? I ordered a 17 tooth...
  3. C

    final gear ratio

    not sure what a good gear ratio to shoot for is. I have a 6 horse with a 10 tooth clutch and 60 tooth sprocket and I will be adding a jackshaft but do I want to stay with 10 tooth spockets (final drive 6.00)on the jackshaft or like a 13 and 17 (4.59 final drive)...I'm not looking to set land...
  4. electrathon

    3 hp gear reduction Briggs

    Forgot I had this little engine sitting in the shop. Kind of cool with the gear reduction.
  5. J

    NOS 30 tooth #35 1st gear

    Have had this stored for many years. It is a 30 tooth #35 chain 1st gear. Has the bearing support, keyed for a 5/8 shaft. Mounts to shaft with a roll pin. Maybe fox or ??? 58.00 shipped. Postal money order only please. Regards, Joe51
  6. A

    gear ratio help

    I have a doodlebug predator 212 hemi. With gov still on 3 stage loop exhaust Ruixing carb .035 jet new imulsion tube K and n air adapter I have 15x6x6 rear tires 13t max torque clutch My gear ratio is about 5.5 to 1 Will this harm my clutch ? what is the range of...
  7. R

    30 series TAV gear ratio question...

    Guys, I apologize for asking something I'm certain has been asked before. I swear on my only child's life that I did a search, and there is a lot of info our there on this, but I was having a hard time finding what I'm after. I need advice on what gearing ratio I should shoot for wit my tav...
  8. R

    Sears roper 2 speed Sprag gear wanted

    I'm new to the forum so thanks for the ad. I'm restoring a Roper mini bike with a 2 speed transmission. I'm missing the sprag 21 tooth gear and have no idea where to get one. Would very much appreciate a lead on where to buy or if someone has one. Thx In advance Jon
  9. R

    2 speed Roper Sprag gear needed

    Hi guys-I'm a new member from Florida trying to restore a old sears roper 2 speed. I have everything but the Sprag gear and have no idea where to get one. If anyone has one or a source , that would be awesome. Thanks in advance!
  10. C

    NOS Toyoco Sprocket Gear

    63 tooth Still sealed in factory bag slight shelf wear located in Wilkes Barre Pa 18705 $45 PayPal
  11. xBrent92

    Highest gear ratio you've run?

    I just want to hear some experiences with high gear ratio and the other factors that go into play along with them such as: Weight of mini-bike (or go kart) and operator combined. Gear ratio. Size of tires. estimated top speed estimated time to get to top speed. `My personal experienced...
  12. I

    Torque Converter Reverse Drive Clutch & Gear

    Built a drift trike but having issues with standard centrifugal clutches burning up. Decided to go with a TC but current frame design prohibits normal mounting. Is it possible to mount the driven gear on the outside of the jackshaft? If so, will the bearing be able to withstand the chain load...
  13. P

    Building a minibkie for kids. 3hp briggs, what gear ratio, 15" wheel???

    Hi, I have started making a frame for a minibike. The rear wheel is a 15" diameter (395mm), has a 70 tooth sprocket on it #428 pitch and size chain. The engine I have is a 3hp briggs. What gear ratio would I need for hill climbing and going slower for the kids? I can get a 12...
  14. G

    jackshaft gear ratio question

    I have searched the forum with no luck so far. im running a predator 212 hemi head with boxstock bored carb mod 1 cam 18# springs and i bought a jackshaft but was wonder ing about the ratio i have a 12 tooth clutch and 54 rear sprocket the jack shaft is 13 and 15. One way i get a ratio close to...
  15. R

    Recoil starters, gas tank, cam gear

    Two recoil starters, both brand new. Briggs Animal and a Tecumseh unit, $30 each, shipped. Tecumseh black plastic gas tank, $15 Adjustable cam gear, still attached to a broken cam, but the gear's teeth all look great and the gear itself is still plenty usable. $15. Animal flywheels...
  16. M

    Briggs 5hp I/C reduction gear crankshaft questions

    Hello everyone, questions from a newbie. I just recently acquired a 5hp Briggs I/C motor that I was hoping to use in a mini bike. It has a reduction gear so when I took it apart I found that it has a splined crankshaft for the gear, not the round shaft with keyway I am used to. I am a lot more...
  17. Sport King Eric

    Looking for a Boonie Bike Gear shifter in good shape

    I need a 2 speed shifter for a Boonie Bike that the plastic is not cracked!
  18. CJdoodlebug90

    How Much Horsepower? Gear ratio?

    I have a 212cc non hemi and I want to know how much hp im making. And once I know how much hp im making I need suggestions on 1/8 gear ratio (clutch to sprocket) Currently have 12t clutch 70t sprocket Dyno cams - mod2 18lbs springs (26lbs on the way) E tube and .32 jet 2 degree timing key...
  19. B

    Tote Gote High/Low Gear Box

    Hi all, obviously brand new to the forum. My cousin and I have been working on restoring an old mini trail bike. To be 100% honest I'm not confident it's a Bonham brand, it very well could be a Sherpa or some other random manufacture. I've installed a new engine in it which is working fine. The...
  20. H

    Proper gear ratio?

    Hello. I recently bought an old (1968) 2 hp flat head Briggs on a local swap meet. It seems to be in good shape except for the gas tank, which has seen better days. Now I'd like to build something fun with it and I thought of a minibike. I don't know if the 2hp is strong enough though, what...
Top