guide

Taco 100 review holiday mini bike guide

In the spirit of the Holiday Season - and if time permits - I plan to scan and post the entire 27 page 1969 MBG Christmas Buyers Guide for you guys. It contains many of the well known brands, but also has some real obscure bikes that some of you may enjoy revisiting (or seeing for the first...

Hi, I have a new later model H50 short block. The intake, valve guide looks like it wasn't pressed down all the way, and will not help keep the valve spring cap centered. The exhaust looks correct. Funny thing is the old block was the same way. I have punch that looks just like the Tecumseh...

Below is a link to a decoding guide for the numbers stamped in the Tecumseh carb bodies. It can be used to cross-reference the three or four digit stamped numbers to a six digit number. The six digit number can then be used to find carb repair parts and specific engine model applications for the...

Below is a link to a decoding guide for the numbers stamped in the Tecumseh carb bodies. It can be used to cross-reference the three or four digit stamped numbers to a six digit number. The six digit number can then be used to find carb repair parts and specific engine model applications for the...

This is the second issue of the 1969 bi-monthly Mini Bike Guide magazine. Back then the Printer used some weird paper, and so it's heavily yellowed. All the pages are intact, but the cover is torn at the spine & is barely holding on. There are 68 pages including the covers. Yes, it's been...

Here are the first of the scans guys injoy. will ad the rest as time permits.

is it hs for ohv, hh for flathead and h for ohc?

MINIBIKE GUIDE DECEMBER 1970 SPECIAL EDITION!!! | eBay

does any one have a valve guide reamer for a 3hp briggs that I could borrow or buy? I have the brass repair guides but I need the reamer and tool to drive them in. I could just take it to the local repair shop but I want to do it myself

Rocker Arms, Heavy Duty, Reinforced, Extreme Duty (1.1 to 1 ratio), Use with 26 lb springs. $25 shipped (bought at NR - paid $45 for the pair) Billet Guide Plate (brand new, only mounted. Could not use it with the push rods I have) - $5 shipped Parts are for a GX200 or Clone. Paypal...

Looking for someone who has the september 1970 issue of mini bike guide..... Hoping that someone has it and can scan the part about the arctic cat ssscat for me. Apparently these guides are pretty collectable, so I'm sure someone on here has one.... thanks

I just installed the ~1.3 rockers from NR racing in a GX160, I have currently run the engine but not long with the OEM pushrods. While surfing ARC website I noticed they state that this Guide Plate is required for the stamped 1.3 rockers. I noticed no such advice from the NR website, is the...

Looking for this edition of MINI BIKE GUIDE - April 1970. I'd be happy with photocopies. Thanks

Looking for Minibike Guide Febuary 1969 Jul/Aug 1969 November 1970 Minicycycle July 1974

Sorry for the delay, but I finally had these chain guides made. These are based off of the Cat Chain Guides. The original chain guide i bought off of MAC It is made of a harder plastic material than the original, so it's going to last longer than the original. Im having another batch made once I...

a lot of questions are always asked thought i would post this link. Even though this may not be the exact tuning manual for your carb after reading this you should know what changes to make to "tune" your carb in. http://www.mikuni.com/pdf/vmmanual.pdf

I have someone willing to make them for me. The material he'll be using (nylon) will be stronger than the original. Anyone out there interested in one? Im asking because it would be a waste of time if he just made one. Pic taken from Mac's post

looking for some scanned editions of mini bike guide, you could sell me a top of the line sd card that happens to have some "old data" left on it, im supposed to erase of course. pm me!