This vintage Comet TC-88 that takes the symmetrical 5/8 inch wide belts
This is the 7 inch in diameter unit and is a 3/4 inch bore.
I have 2 unit and the price is $35.00 for one or $60.00 for both.
Steve :scooter:
Manco 4" front. i need a half wheel or a complete, please see pic. PM or call scott, 313-213-6931
http://i1127.photobucket.com/albums/l629/six97s/2011-07-24175908.jpg
I have for sale 2 new old stock Comet symmetrical TC-88 driven half torque converters. Comet part # 204084 they are 3/4 inch bore and take the 5/8 inch wide belt. They are the 7 inch diameter driven unit this give you a lower gearing.
My Comet book shows by going to a 7 inch driven unit your...
2 new old stock Comet TC88 series symmetrical driven units 3/4 inch bore and 7 inch Diameter takes the 5/8 inch wide belt. Comet part # 204084 no box or instructions.
Price $ 35.00 each or both for $60.00 Shipping from 97229
Steve :scooter:
hi my hs40 needs choke to start it then it will only run on half choke when i flip it to run position it dies and it really dosent run that bad on half choke even after its warmed up only runs on half choke :shrug: it ran that way before i rebuilt the carb does anyone know i searched this...
It was too dark to take pics but you know I will. I picked up another Montgomery Ward T-555 and a half of another one. The back half. From where it bolts to the front half back. So it has the differential and all the good stuff. $150 for them.
Well since Delray bought the only Trailhorse Wheel at the swapmeet this past weekend, I am still in need of ONE HALF of a Trail horse six inch five spoke aluminum wheel.
Anyone got a good half?
My Bonanza 1100 has a chip out of one side of the wheel so im looking for a 6inch wheel half the undrilled non brake mount side, cant remember if the undrilled side is the wide or narrow one. You can see it on the upper part of the rear wheel where its at the tude.
Thanks Jeff
This tank was brand new when I got it. I painted it and used it for about ten minutes on a bike. It has the mounting brackets with it. It's painted with automotive urethane with hardener so it is gas will not effect it. It does have one small little ding in it that was there when I took it out...
Hey guys I have a 10hp Superbronc me and my dad have been working on. We got it running and it runs great it only has like 20 original hours on it. The problem i am having is that it wont go past half throttle. If it is sitting there not running it will go full throttle. if it is running it...
I would like to find a wheel half like this. I need the side without a valve stem hole. Looking for something pretty nice. I would also buy a whole wheel if thats what you have.
Thank you:scooter:
Aluminum,excellent shape,someone needs this because they have a broken one.........1-3/8" ball bearing fits the opening and it has a 6 bolt pattern to mount up.Off an early 60's go-kart(remember those?).
$25 includes shipping via UPS.
regards,Joel
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.