head

is a 19mm promax carb too big or not big enough for a (modified)hf212 and no one replied when i asked if buying a ported head with bigger valves is better than buying big valves and installing them and doing my own port work (hemi engine)

new take off hemi head complete springs rockers valves $50.00 shipped :thumbsup:

looking for the cylinder head cover for 820 west bend with angle plug, want one with no damage, thanks

I have four sets of tecumseh HS40 engine decals. Set includes Indian head decal, air filter decal and side cover decal. $20/set shipped. Also have one hs50 Indian head decal and one "tecumseh racing engine" decal. $8/each for these decals. PayPal only. Thanks!!

I posted a want AD for a 14cc head.the seller said i have one, so i bought it. I got it in and first thing i noticed was the chamber does not look like any 14 cc head I've ever seen, even though the casting said zh8. Matter of fact, it looks like every 18 cc head I've ever seen. Im ordering...

Guys, Just finished my first rupp roadster turned out pretty good. But I have a problem. I used chrome masters out of nashville to rechrome everything and they did an awesome job, but they do not do plastic. So I need to find a place to have the head light buckets chromed. Found a place here...

i have a 69730 predator that has a mild build. so far it has ARC billet flywheel ARC billet +20 rod black mamba cam header+air cleaner 22mm mikuni 26# springs and im adding a 14cc head ported and milled 65thousands 27mm intake 25mm out. stainless valves locks and retainers and chromoly...

Super clean and NO DRYROT or CRACKS. double Indian head 12.5x4.50-6 6" this is a fatty 4.10x3.50 basically. Lil Indian used them on some of the sabre type bikes, couple other comapanies as well. $75 plus $16 to ship, I thought someone on here recently asked me for a set of these but I cant...

Thanks

I started working on my Cat Duster MX last night. The previous owner had a 5hp Briggs on it when I got it and I honestly haven't paid much attention to it. After I removed it from the bike, I set it over to the side and started cleaning the frame. I didn't notice the head on the bike until about...

Complete 6" wheel with 72t sprocket and drum. Tire is shot. $50 shipped

have a predator hemi head and stock carb for sale $45.00 shipped :thumbsup:

Hello everyone, As the winter approaches I am looking to take my Predator apart and make some changes. I am looking for recommendations on who to use to blueprint a Hemi cylinder head as well as purchase a blue printed carb. Any and all comments are welcome. Thanx in advance...

Thinning the herd! Custom built 1968 Taco 99 Trail Tamer full suspension minibike with race modified Briggs 5hp engine. One of a kind auto restoration quality restomod by OldMiniBikes member Havasu Dave, I bought it this last summer and rode it just 5 times. Loud n Proud this one. Pretty close to show...

Hello all, I have purchased a benelli dynamo mini trail , I was looking for infomation on oil mix engine identification 50 or 65 cc, trans oil what year etc,. I already borrowed the wiring diagram which is identical to mine. the engine was stuck but looks to be able to be cleaned up...

Thanks for stopping by! Just got me a Taco 22 and I am in need of one Carlisle double Indian head tire, 4.10/3.50-5 to help me start my build. Let me know what ya got, or what you need, or how much cash! ...and if someone wants to hi-jack my thread and give me one for free, that would be...

I have a 4 hp Briggs block and parts everything is there except the rod and piston, I have the tank too but not pictured. I also have an hs40 I think is off one of the rupps I bought, all internals are there but missing carb exhaust flywheel and coil. This stuff came with all the rupps I...

who does the best head work in michigan :thumbsup:

Carlisle Double Indian Head Tires in the popular 4.10/3.50 x 6...common on many early bikes. All in excellent condition, I flexed the sidewall and the tread and they are still nice and pliable with no visible cracking or checking or scars in the beads. They are nice tires with a lot of use left...

Hello I have just finish building my new engine, its a hemi bottom end with a 18cc honda head milled 50 thousands. I am concered about the pushrod length, will the stock non hemi pushrods work or do i need cut to fit pushrods? I have started this engine already and it seems ok but i would like...