heavy

  1. Z

    Doodlebug Tire Question - Heavy Rider

    So I did a little trading and ended up with a pretty nice little Doodlebug with the jackshaft kit on it and possibly some other mods I just haven't figured out yet. So here is my question, I am 6'4 - 310 lbs and I hear with the right setup I can ride this thing around with my kids that have...
  2. Sixpac440

    Replacing the worn teeth on a Bonanza 60t Go-Power ... Pic Heavy

    beekeeper got the Bonanza he always wanted thanks to jeep4me!! The sprocket was worn down to the nub. He bought a flat 60t off OldMiniBikes ... Both the old and new sprockets went on the CNC Wayne the CNC guy named the program .. Made a jig to hold it while I stitched the back I only MIG...
  3. DeadPixel

    Heavy duty cast aluminum rod?

    Was looking at performance parts and found a cast aluminum high performance rod. I have seen these in a few places. Any one run these. I found a stage 1 kit that has a PLV cast flywheel, 18LB springs and the heavy duty aluminum rod. I already have a billet rod and my flywheel but am wondering...
  4. Sixpac440

    LED Brake/Running Light with Turn signals and Handelbar Controller Install, PIC HEAVY

    Studz Hardware Studz Powersports & Hardware is located in Dearborn Heights, MI. Shop our large online inventory. was selling this Kit for $50, I bought 2, it was $116 delivered. It came with the handlebar controller, light bar and a flasher relay. The light bar has a tape backing to stick it...
  5. jeep4me

    Heavy Duty Belt Clutch...NORAM

    I have a decent used North American belt clutch for sale. 3/4" bore, fits A or B size belts. Used on dirt compactors. That's what it was on when I got it. I never did test it before removing it from the engine, but everything looks like it's in good working order. Asking $65 plus shipping...
  6. imthegrt1

    Heavy duty built

    Pick this jewel up last night Love the spring seat and check out the foot brake
  7. gumpit

    13+ inch heavy duty shocks

    I need some heavy duty shocks for my rupp. I need something that wont allow the rear fender to rub with my fat ass on it. What do you have?
  8. capguncowboy

    Taking a ride on some survivors (Picture Heavy)

    Last week, TheJoker came down from the Chicago area for a visit here in East Tennessee. He brought a few engines and we went through them to get them running, and spent a couple of days going through and cleaning up his bike and getting it ready for a ride. A couple of weeks ago, I picked up...
  9. R

    Heavy throttle, help please!

    I recently purchased a CL Baja Heat with Hemi Predator. The carb throttle lever moves easily enough, but the original Baja twist throttle is heavy & long(to twist full open). Is this a cable lube issue or something else? The nut on the linkage is not snugged tight. The original speed control...
  10. jeep4me

    Briggs Heavy Exhaust Nuts

    I have two original Briggs heavy gauge exhaust nuts for sale. Will fit on 3.5hp and smaller Briggs exhausts. Not all beat up, great condition. Pictures coming. Asking $5 each, shipped. PayPal only, as a friend.
  11. D

    Seams Heavy Duty Whatever It Is...

    The same guy I bought my Arctic Cat from was trying to throw this in as a package deal.
  12. minibikin'

    Heavy patina Trail Horse forks needed....

    Unfortunately I sold the forks I really needed for this project not thinking I would ever build it. I need some Trail Horse/ Trail Blazer forks with heavy patina/surface rust. I'd prefer suspended, but show me what you have. Bonanza forks may work also. Thanks!!!
  13. markus

    custom kickstand, larger wheeled bike

    Possibly a prototype Harry Johnson original???? :out: I doubt it, came with a parts bike I bought, I searched for while on ebay and through some motorcycle vendors for a match to it to no avail. Its not heavy but it is pretty heavy duty and not the bicycle style, I would say it would be a...
  14. JohnnyTillotson

    Briggs and Stratton Model 23A

    Selling this running Briggs and Stratton Model 23A. I believe it was made in 1955. I am almost positive it is all original except the muffler. It is a beast of a motor. Huge and heavy. It came off a generator and I think the guy still has it in case you want to do a full restore on it. I...
  15. ludicrous speed

    bars/forks/wheel and old motor with comet clutch / Pic Heavy

    got these over the weekend,along with a manco go cart. the guy had a ton of those chinese bikes but only these older parts. please lmk what they go to,thanks
  16. M

    My Murray...pic heavy

    Well, I got this Murray Track II a little while ago. I had been looking for one because I had a picture in my head of what it could look like. RobertC was kind enough to let me know about this one. First, I took it apart and cut all the brackets and stuff off the frame that I didn't need. I...
  17. D

    Sensation frame right-side heavy w/Predator

    This has been bugging me since I put the 6.5 Predator on my Sensation MB-6A "Mike-Bike" frame. In order to line up the clutch gear with the sprocket, the engine needs to be pretty far to the right. That's even with the clutch gear inside. This makes the bike very right side heavy, both...
  18. 2

    Heavy Duty Sprocket Hub

    Brand new Heavy Duty Sprocket/ Rotor Hub : Go Karts Parts: Racing Kart Parts: Engines: Frames: Tires: Versailles, Ohio: USA: Indoor Track: Tips: Chassis: Kits: GoKart: Briggs: Yerf Dog: Manco: Comet: Torque Yours for 20 bucks shipped Thanks for your interest! Trevor
  19. dw1973

    Noram 1600 Heavy Duty Clutch 1" bore 14 tooth 41 chain

    In great shape - $65 shipped from 49235.
  20. Bikerscum

    Heavy duty tube flaring tool?

    I have a job at work where I have to put a standard 37 degree flare on some HEAVY duty stainless steel tubing.... .500 OD .065 wall. We bought a couple of hand flaring tools, one costing over $300.... no go. They use a screw in type of male tool, and it stops well short of making a good flare...
Top