hilltopper

Looking for a torque converter side cover for a Heathkit Hilltopper. May also be interested in any other Heathkit Hilltopper parts or manuals you may have.

Normally it would be a who cares topic .... Stock tire size is 5.30x4.50-6 I could not find that size in a similar tread pattern but was able to find a similar tread pattern in a 15x6.00-6. Its slightly wider and shorter than stock ... I wasnt sure it would fit but got one any way and...

Needs rechromed but no dents or holes in it. If anyone wants more detailed pics or any questions pm me. Thanks $75 plus shipping

does anyone know how long the front brake cable is supposed to be for the heathkit hilltopper front brake? also looking for how the front brake hooks up to the brake lever on the wheel. the brakes are in good shape just no cable I think I could use a clevis setup on it but would like to have...

Hi All, First post. I have a Heathkit Hilltopper which is in line for a 'just get it running' restoration. At some point in it's history, someone removed the torque converter and replaced it with a centrifugal clutch. Could someone recommend an aftermarket T.C. for this bike? Thanks, Roland

Have had a few requests for the manual on here. If anyone needs a close up of any page let me know. I also have the "Engine theory and maintenance manual" for the H50 View image in gallery View image in gallery

Hello, I recently picked up a Hilltopper that was disassembled and in boxes. Does anyone have a copy of the assembly manuel. I will pay for the copies and shipping. I would also buy an original manual if someone has an extra to part with. Pm or post here if anyone can please help. Thanks! Eric

I picked up a Hilltopper that a guy was going to restore but lost interest and...parts also. I looking for the bushing that fits in the swingarm.

Hi. I'm new here. I recently bought 2 matching heathkit hilltoppers. I have 1 at the powder coater now. Question is the rear brakes. I am missing both. What has been used since it has a 5/8 shaft? I can't find a 2.5" band brake anywhere.

I have 2 Heathkit Hilltoppers for sale . First one is an original paint lighted coil that I have all major parts but wire harness . Second one has been painted black . It does not have lighted coil or had any lights on it . I have most of its parts but the knobs that tighten the handle bars ...

I have a 1971 Hilltopper that a buddy of mine lost the brake shaft. Also need to replace front shocks. Any suggestions on where I can order parts?

I have a Heathkit hill topper minibike. I put a big block 6hp Tecumseh motor in it and a new torque converter clutch. Also a new seat. Real fun minibike with plenty of power. good for a big kid or an adult. I also have a ton of minibike parts. I started building a drag minibike frame. I have...

I am looking for the chain/wheel adjusters for a Heatkit Hilltopper or a good close up pic of what they look like Thanks

Heath Hilltopper Mini Bike http://images.craigslist.org/00z0z_ezDqFxdhv11_600x450.jpg http://images.craigslist.org/00I0I_1yQx8SPG0yT_600x450.jpg http://images.craigslist.org/01313_aXjiaYeR460_600x450.jpg http://images.craigslist.org/00q0q_kFPTVqpFcoP_600x450.jpg...

Looking for a hilltopper frame. Doesn't need an engine, just looking for a project.

well I got my hilltopper running today. top speed of 11mph pulled the cover off of the torq-a verter there is not a spring in the rear pulley and someone bolted the pulley together see below what can i use for the spring in there? thanks for the help

Like the title says I'm looking for a Heathkit Hilltopper Jackshaft ... Thanks Kevin

Saturday I was out on the Hilltopper and the right hand jackshaft bearing came out of its holder. The "C" clip groove had worn away. A large groove had been worn in the shaft also a lesser groove where the other bearing sits. I welded it up, ground it in, new bearings and clips ...

looking for a project/builder heathkit boonie or hilltopper frame. more into the boonie frame but,i could use either. dont need much more than the frame,fenders and wheels. doesnt have to be original,just not cracked or rotted. again,this is for a Project build,so if you have a minty...

Here is a Hilltopper I recently got gonna give it a try at restoring wish me luck !!