home

Any help is appreciated

https://minneapolis.craigslist.org/wsh/mcy/6172461167.html If not I'm going for it thru my broker.

Soon.

I was quoted $75 to do 2 Heald wheels that are clean as a whistle. I see $80 powder coat systems on eBay .. electric ovens are cheap on CL. Thoughts?

I see pictures from time to time of home made "minibikes". I thought I would start a thread where we can post our creations. I wish I had pictures of all the stuff I built back in the 60's. I, and some friends, would garbage pick old bikes, lawn mowers, dryers etc. Many times I would take a...

Well, here I go again. Found this Doodlebug discarded. That's right...It was free 99! It had been crashed a little bit (front fender and right side handlebar) and it's puny 3HP motor is seized up and missing it's recoil starter. I was happy to put it next to my first finished full...

It died on the trail in 2003 and has been sitting in the shed ever since, 14 years. Tires hold air but are weather checked. The gas tank is bone dry. plug was covered with soot. I pull the ripcord and it dosent feel like there is compression .. I don't see any holes in the block. Oil...

Here it is! the Rowdy Ruttman. This is one of my favorites, but it needs to make room for the new addition! The Ruttman frame is unaltered, coated with prismatic powder in a brilliant sparklee lime green/yellow color. The seat is done in a grey outdoor canvas. The hopped up Briggs 5HP engine...

Here are a few pictures of my home made super bronc vt8-12 muffler. I made it out of 3 inch exhaust tubing and 3/4 inch tubing for the inlet and exit pipes. I cut out and welded 2 discs into the inside of the exhaust tubing with holes drilled randomly throughout to equal the volume of the 3/4...

So I was at a show last weekend and ran into a fellow mini biker. He brought along a bike that he bought at a large old car swap meet in IOLA WI. As soon as I saw it I thought it was one of the coolest home made mini bikes I have seen. I asked him if he ever wanted to sell it let me know. He...

I'm looking for a vintage home built bicycle frame mini bike send pics and price to myj181@gmail.com thanks !DSC_2120

Just wanted to say many thanks to member Peekster for his generosity in selling me his DIY home made mini and bringing it to the races and to member Gumpit for being so kind as to bring it back for me from the Mini and Trike races held out in Wachusett Valley in MA this weekend to his home close...

Looking for a do it yourself, homemade DIY mini made from the plans popular mechanics and boys life used to offer around 1965 66 using old bicycle frames. A lot of the plans called them Scoot'r-bike. The more unique and features the better. Made a few as a kid. Rather find one from the era...

Did a Bird follow me home if so which one ?

1970 Arctic Cat SSScat II St. (St.=standard, no lights or front brake. I have a soft spot for these 1970 model Arctic bikes, as this is my second one. This one is a bit sweaty, but all of the model specific parts are there and they are pretty nice useable condition still (seat, tank, drive...

Jerry Mack Gasoline Rat -build in progress

Hello: Just registered today. Working on 2 Baja Warriors that I bought disassembled in boxes. I ordered a Lifan electric start (LF168F-2BDQ) 5.6 from the Home Depot. So far so good. Started up and I changed the exhaust and air cleaner. Jackshaft set up and likage were easy as well...