hydraulic

I have a mechanical brake set up seems like it locked or froze up and is stuck rubbing on wheel I was wondering if it were salvagable or get new mechanical or just switch to hydraulic I have a 6.5 hp predator idk if the mechanical will have enough stopping power now I f I do switch to a...

so ihave the hydraulic brakes from hotrodminibikes and the caliper broke during a day of riding so once iget the new caliper in the mail is it just a simple swap no brake fluid.

While doing some tuning and of course high speed runs I went to stop and there was a pop from the rear. Going wayyyy to fast for the stop sign at a T intersection. Thank god no cars were coming and I managed a hard right and got it slowed down. Never thought about the kill switch although I was...

Here's my situation, I bought one of these cheap chinese 50cc/70cc/125cc hydraulic calipers, and plan to get an equally cheap lever. A couple questions for anybody familiar- What kind of lines do I buy? I see all kinds of different materials and PSI ratings but neither the brake caliper nor...

I purchased this for a DB, but it is not the right bolt pattern. I believe it does fit a Motovox mini bike. 51" Steel braided line Left Handlebar Chrome Lever $50 shipped or best offer Paypal - USPS - Fedex Fremont, Ca

I found a great rear hydraulic caliper replacement with no modification. Brake - Rear, Master Cylinder, Brake Line and Caliper It works awesome, better then other hydraulic caliper that most everyone else runs. I just used the new caliper with the kit, kept the old hydraulic lever & hose...

On sale from $280 down to $170, use a 20% off coupon & you're at $136. Not bad :thumbsup:

Ok so here is the rundown I recently took them off my doodle bug then accidentally pulled the brake lever and the pads came close together and were hard to separate so I took em apart and used a c clamp to compress the piston back in, last night I reinstalled them and they didn't have too much...

I took them off my doodlebug about two weeks ago,I go to check them tonight and the pads are almost touching,what's the problem? Any help would be greatly appreciated:thumbsup:Thanks

ATV Quad Rear Brake Assembly Master Cylinder Caliper 50 90 110 125 CC Chinese | eBay I found these on ebay and want to be sure they are good. After reading some of the threads on hydraulic brakes blowing up I am unsure if this is the right choice.

has anyone tried out these brakes on a doodlebug? if so can you share some pics, need to beef up my brakes and looking to try these out, but not sure about installation .. thanks ATV Quad Rear Brake Assembly Master Cylinder Caliper 50 90 110 125 CC Chinese | eBay

Looking for a single/dual piston hydraulic brake to set up on my doodlebug... anyone have any idea or know where I will be able to find/get upgraded hydraulic brakes for my mini bike. I already have the weaker hydraulic brakes, but need to upgrade from here. Any suggestions is helpful thanks

Has anyone tried doing a hydraulic foot brake setup on an old school mini?I'm thinking about trying to use a piston setup from a dirt bike or atv for my rear brake,they're relativly cheap to buy but I dont know how much of a pain in the :censure: it would be to fab up the brackets to make it...

Cleaning up some of my spare parts and making room for more new stuff. I purchased one of these hydraulic disc brakes for one of my projects and was unable to use it as planned. http://www.partsforscooters.com/Rear-Hydraulic-Brake-Assembly I did disconnect the caliper from the brake hose...

So I installed a hydraulic brake kit from hotrodmini and installed it with a couple washers to space it out a little bit which it needed. Brakes work fine till you hit the lever once and the brakes pretty much drag / stay engaged till you tap the lever again. Also maybe worth mentioning when...

Raccoon 2wd- built by Jeff Parker of hydraulic innovations.

basically I was doing some rough riding and I slammed on the hydraulic brakes and the caliper exploded... Any ideas on why this would of happened and maybe ways to avoid it from happening again in the future? The caliper basically cracked and all the fluid drained out, can the line still be used...

Well I think I'm done with this bike so I'm gona part it out assuming noone wants to trust my crappy welds. Heres the upgrades I've made EVERYTHINGS FOR SALE Hyrdraulic brakes, atv 16" tires (ton of tread left), live rear axle, #35 clutch 12 t, #35 12t TavComet2 (paid $200 a week ago,Will...

CHINA pit bike hydraulic fork legs for sale good chrome & THEY WORK WELL PM ME. ILL need a US Postal Money Order... i cash & ship at the same place.. $40.00 SHIPPED with tracking #

I installed the hydraulic brake system and it moves when they are engaged. It would seem that this would cause premature where. Does anyone know how to stop the movement.