install

  1. K

    PMR Jackshaft install help

    I have a PMR Jackshaft and a Briggs & Stratton engine pictured below. The bolt pattern on the PMR doesnt match the value cover on the engine. Even the center hole on the PMR is to small for the small outlay near the shaft. I can easily expand out with a drill press but I am wondering about...
  2. brendanp

    Max torque clutch install question

    I will be upgrading the doodlebug 2.8 with a new predator 6.5 I purchased a max torque clutch as suggested by one of the guys here. I'll be running the clutch with the gear inboard towards the engine case. My problem with it now is that the output shaft sticks out farther then the clutch...
  3. D

    4.5" drum brake install

    Okay, so I've never installed one of these, and there wasn't one on the project I bought. I think it is a bird frame, but I can't be sure. It does have the tabs for a scrub brake, but I'm not using one. The bike came with 6" wheels, and the rear had the drum/sprocket already attached, and it...
  4. C

    butterfly removal/ install

    Have 5hp Briggs FH with pulse jet carb. Is there a trick to removing the butterfly? I back out the idle adjustment so the butterfly closes, but it is still at an angle to the screwdriver head. I guess you just have to finesse it best you can? :shrug:
  5. K

    Please help kill switch install

    I saw a post dealing with hooking up the handlebar kill switch to predator engine, it was a great post, showed wire A going here etc... I can't find it, anyone remember where this post is! It is very recent, I tried to search but couldn't find it...
  6. P

    Ruppparts TC Driver Install

    I ordered a replacement TC Driver for my 71 Rupp Roadster/2 from ruppparts.com. Rupp Blackwidow, Roadster 2, Scrambler, Enduro TC-1 torque converter What they sent me is in the first picture. Does anyone know the order that it all goes together? It included (2) 3/4" washers and I don't know...
  7. B

    Need some input on a boonie bike motor install

    Hi there, I'm trying to put a Briggs and Stratton 10 hp motor off a generator on it and the motor just fits in the frame but I'm wondering what I'm going to have to do with the crank since its tapered and has no key way, has anyone here run into this before ? Any help is appreciated
  8. M

    Choke hold bracket install

    Can someone please give me an idea on how to install the choke hold bracket on a clone or even better post a pic thanks in advance
  9. bigdaddy4026

    valve spring preasure and install height

    my son has an intech 6.5 that he wants to put the animal rod and cam:hammer:, also a bilet jr flywheel, my question is i have tons (like 20 to 30) different flat head springs and a spring pressure gauge,:shrug: can someone tell me the spring pressure and install height on an animal spring hoping...
  10. H

    TAV's can they install vertically?

    Can a TAV unit be mounted straight up and down? I dont see whay it wouldnt work but looking for feedback before I set it up that way. Im looking at having mine vertically with driven/sprocket below the motor.
  11. R

    jackshaft install

    I have searched and found a lot of threads about 100.00 jack plates and bolt on jackshafts but I don't see any mention of the lower priced jackshaft kits available. Did anyone ever buy a 50 dollar kit and install it on a DB or an MB?? Pictures????? How did you install?? welded end caps? Pillow...
  12. David wulf

    Pcv valve install in my honda valve cover

    Yes thats what i did . I have the champion rockers and needed the tall cover , well Tim was out of stock when i got my cam and rockers . So instead of waiting for them to come in or buying the costly spacer , i went with plan B . Which is pull out the guts of the cover then you have enough room...
  13. David wulf

    Champion rocker install ????

    When installing these rockers do they need spacers under the pedestal ? After doing searches on here seem like some put washers under the pedestal . Is this needed ?
  14. firemarshal71

    Motovox 212 install with frame modifications

    Hi group. Bought a MBX10 for my 10yr old son for christmas and liked it so much that I bought a second frame ($109 from Motovox) to modify and install a HF 212cc engine. After reviewing several threads, I decided I did not want to spend $200+ for engine upgrades just so that it would fit in...
  15. 93notch408

    preadator slow after cam install

    i just got a black mamba cam and 26 pound springs installed them in my bike and it lost some mph over the stock cam and stock springs mods are: aluminum flywheel 4 dagree advanced header pipe but its kinda short 90 jet in the carb air filter and adaptor black mamba cam 26 lb springs...
  16. S

    Billet flywheel install

    I bought a used billet flywheel for my 5hp. I believe it is from a 3hp engine. As I look it over I see it has no keyway. Haven't found anything online about how to time this to my engine. Does anyone have any ideas, or a direction to send me in? Thanks all, Chris....
  17. butch63

    band brake install

    i saw a mini on cl today with a band brake installed on the clutch. is this common practice? acceptable?:shrug:
  18. gturner598

    Intake install

    I got my intake today in the mail from OldMiniBikes. I was able to get it installed but I have no clue what am I suppose to do with that little hose that was connected to the stock air box. I tried searching and looking at pictures but couldn't find anything. Thanks. Sent from my iPhone using...
  19. oscart

    Taco clutch cover install

    Does anyone have pics of the proper brackets that hold the Taco clutch/chain guard on a Taco 22 with a Briggs engine? I would like to have an original setup and not butcher my new clutch guard. Thanks!
  20. J

    need 5 hp briggs ready for mini bike install

    looking for a running 5 hp briggs that is ready to drop in a mini bike and hook up throttle and go. I live in waterford (oakland county) I need this asap, have a ride saturday. Not wanting to spend over 60 unless in great shape, other than that I do not care about looks. Jim
Top