jackshaft

I've got the bike torn down other than this rusted mess. I took a nut off one side and a C clip and washer off the other. Anybody that has any experience with these and would like to give me their input I would sure appreciate it. Here are some pictures of what it looks like.

Looking for forks as someone went wild with rebar on these ones lol... Also a jackshaft bracket for a Boonie as well as it's currently running direct... Please PM me with what you have... Many Thanks !!!

NOS Bonanza 2 speed jack shaft. Thought I would use it, but looks like not. Has never been used. I did disassemble it and cleaned the hardened wax like grease out of it and lightly oiled the sprag bearing. Works as it should. There is some very minor marks present on the shaft- see pics. Nice...

any one have a 4" approx disk for a 5/8" or 3/4" jackshaft mounted mechanical disk brake or where to get or make one? thanks

Hello forum members. New guy here and wanted to introduce myself. I have a Coleman Ct200u and this is my first mini bike:scooter: It's fun as heck and has plenty of torque to satisfy my current needs but I would gladly trade for more speed. Reading about mini bikes here is what made me...

I'm selling this re-poped Harrison "under the engine plate" jackshaft stand. I picked this up last fall and never used it. It includes two sets of foot peg bars. One is just a solid bar, the other is for fold up pegs. Or don't use either, just an added feature. Also includes the TAV...

Im looking for the roper jackshaft assembly . i believe it has a band brake on it too.

I just got a new jackshaft from OldMiniBikes and it doesn't have a key way cut in it what do you guys do with these as it seems the gears will spin out on it with just set screws.

very lightly used Comet 2 speed assembly, along with Max Torque 2 speed clutch (3/4" crank) Both have the same amount of use, not much at all. Jackshaft is 8.5" long (take off from a Rupp C350 as we put it back to factory setup-non jackshaft/direct) Very clean, j/s support bearings even feel...

Had my first follow-up with surgeon today (he's pleased, so I'm pleased), but before I headed to Winchester I finished up a pair of TAV Jackshaft Brackets to install on Copperhead, my "mule" bike. The difference between these brackets is the TAV bearing mount is welded to rather than bolted to...

I am trying to figure out what is the best way to run a swing arm and the jackshaft in one mount. Along the way the Bonanza mounts work/look that OldMiniBikes sells. Is there a rule of thumb for the 2 points being to far away from one another? Or do they need to be as close as possible? I fell like I...

Looking to do a Two speed jackshaft on my Trail Horse. Found the engine clutch but where can I find the clutch for the jackshaft. Is there anything special I need to know. Thanks.

I am getting to the point that I need to purchase and install a jackshaft on my Build Off bike. It is a Baja Warrior that Is stretched and has a 420cc Predator going in it. I have a 40 series TC for it and I will need a 3/4 jackshaft. Do you have any tricks for squaring up all the pieces...

I have a Couparral Tony Pony minibike and it has a jackshaft on it that I want to remove to paint the frame. I've never removed one of these and I don't want to screw it up (it works great). Any advise on this. I can see the bolts holding it to the frame, but do i need to drive the shaft...

Works great, came off a predator 212 but will fit a bunch of other engines... 40.00 or trades? plus shipping from NY 12302

I need the beefier solution to jackshaft bearings. Which would you go with. The usual 3/4" ones didn't hold up for long. A) B)

Selling this great go kart setup....40 series Comet torque converter, with an under engine jackshaft mounting plate. 1" bore on the clutch. Shown on a Briggs OHV engine. Engine is NOT included in this price. Asking $150 plus shipping. Or best offer..... Usps postal money order, cash or...

Does this jackshaft look familiar to anyone? Came in a very random mini bike parts lot that gave no clues as to what it was for (looks unused). Kinda short overall, it is drilled and tapped on the short side.

Looking for a Super Bronc VT8/VT10 Jackshaft/brake assembly like the one pictured. Anyone able to help me out?

Works good $35 shipped