motor

Having to move kind of sucks, but you get to dig stuff out and pass it on, so here are some things that I won't be using, maybe somebody can put them to use. Complete engine, kicks over,not locked. I think I have an extra carb, which will come with motor. One lower fin is bent on head, not...

US 820 motor with repro engine mount sale is for one engine, $400.00

I picked up a cheap $200 baja mb165, he said the engine just needed a tune up. The bike was in bad shape, but I was going to strip it down in parts and hide them in a cabinet from my wife. I Decided to donate a rebuilt MB165 mini bike to a family we know that the two boys father was a...

I was putting the 18lb valve springs in a predator motor and dropped the cap for the retainer. Looked every where with no luck. Even held the bike upside-down and did some shaking. Can only guess it's in the motor. Is there an easy way to check inside the motor?

Here are the model #HS4055285 Serial# 0232 04641, I looked at what was left of the sticker on the frame but, it was no help. Here are some pics. Thanks Tim

Vintage "Craftsman" gas generator - $45 looks like a Lauson(?) Model: 143 65251 Serial no: 9524716 Vintage "Craftsman" gas generator

This bike is going to be a little motorcycle looking thing like an Indian MM5A. Iv got a motorized bicycle kit 80cc fitted with a pull start. And for wheels im just using little 12.5" childrens bicycle wheels. I considered widening them but now im not sure I may leave them as is. I got the frame...

has anyone ever put a modern engine in a vintage benelli mini bike frame. a buddy wants to know

Looking for a correct exhaust for this.

Selling these for a friend of mine that have been sitting on the shelf for years. Two Sachs motors that are apart and could be put back together or use for parts. $50.00 each plus shipping. One Taz cylinder, intake and carb minus the top of the carb. $90.00 shipped. I will get pictures...

I am starting a restore project, I need to replace the rubber bushings connecting the motor plate to the frame. Does anybody know of a website or seller that carries these? I figure they must be a automotive leaf spring shackle bushing, but for what vehicle? TIA

Does anyone have an idea?

https://www.youtube.com/watch?v=IOCTISde-qg

Hey guys I built a non hemi predator 212 last year it has a black mamba sr cam, billet lifters, cm pushrods, 26 lb springs, billet rod +.40, hemi flat top piston, rtc 6 head sanded down around .40 and ported by me (kinda overdid it), 24 mm carb and arc flywheel with built in advance. The motor...

Mac 15 engine. 80cc. In good shape. Been sitting a long long time. Has great compression and spark. The motor is missing the intake and carb. This motor is still a 2 port. Pretty torquey but low reving. The 3rd port is cast in the cylinder, just needs to be machined out if you want a hot revvy...

I purchased a West Bend 580 now I need a motor mount, please let me know if you have one available for sale. Thank you

Vintage Powell Minibike Very Rare Only the seat interests me. Any ideas what kind of engine hard to tell from 1 side?

Did a search, nothing ... I have a mid 70's Heald VT-8 that I would like to add a starter to. It has the hump in the shroud ... Is the motor an H80? Do I need to tap the block? What starter? A snow blower starter with the starter button attached would be OK. Suggestions...

I thought OldMiniBikes had repop motor plates for bonanzas. I guess not so now is anyone making them. I have a frame and the motor plate is so cut up and crap welded to it .I'm not sure which holes and slots are correct. Thanks Rick

Just as the title says very hard to find Hodaka E Motor Engine Ahrma Bonanza Mini Bike Vintage | eBay