motovox

So I was able to pick up a new Motovox mbx10 frame the other day cheap. I'm looking at putting in a clone from HF. Two choices here: get the 79cc and bolt it right in and go slow...or get the 212 and do some mods for a lot more grunt. Important: this bike will be ridden around the dirt roads...

I usually don't go for the new stuff, but is this worth the $$? MINI BIKE FRAME

I'm thinking about using pit bike forks on my mbx10. My question is, is that possible?

Got home from work at 6, unpacked my roller and mocked it up a bit. The rear fender was hitting the exhaust and the valve cover. What I did was cut the fender brackets off, cut 1/4" off between the bend and frame and welded them back on upside down to lower the fender. Also set up the...

I'm new to the site, been looking on here for a while and can't find an answer. I placed an order for an MBX10 roller last night. Wondering if anyone has put an old briggs 5hp flathead in one of these? I can't find anything vintage, and I'm not ready to stop running the flatheads yet...

So I just talked to a motovox rep. And he gave me his email a told me he will fix me right up with mbx11 forks. I will find out if he will be willing to work with every one that want them.

The engine I got came with a torque converter I took it off becaucse its old and rusty I noticed that the rod its on (I don't know the proper term) is a cone shape and not straight like my 2.5. So do I have to change that rod so that I can run a clutch (chain), or could just get the clutch itself?

I have a motovox mbx 10 I think its a 5/8 clutch, my qusetion is Can I use the clutch from my stock motor on my honda motor?

MBX 11 frame and forks with a Motovox MVX 110 engine. Beck's mini keg for fuel tank and ATV rack to give abit of a cruiser look and a custom wheelie bar.

Hey everyone I have a motovox mbx10 and would like to swap out my 2.5 for the hf 6.5 but I don't have any welding tools my question is can I add this without cutting and welding the frame

Well in the process of taring down my Motovox ,I mixed up the rear wheel spacers :doah:. The one is 15/16 and the other is 1-1/8 anyone know off hand which spacer goes where? Sprocket side vs caliper side.:shrug:? Thanks in advance Mark :thumbsup:

For sale new Motovox mini bike customized by Godfather Mini Choppers of Monroe MI. Overhead valve 2.5hp engine 19 inch ape hanger handlebas tough polypropelene fenders rear disc brake asking $675.00 or best offer Email me at mccormid35@hotmail.com for any questions and info

I have a one year old motovox mini bike with a new sprocket, new bearings, new throttle cable (hooked up to bike brake but hav twist throttle). And chain, spent 100 bucks then my motor broke to where its unfixable. I'm located in princeton mn and it would have to be local pick up cash only. Id...

Hi everyone. I'm hoping I posted this in the right place as I didn't see a spot for Motovox bikes in particular. I figured the Doodlebug was close enough. If not I'll apologize in advance. Short Story - I purchased as used MBX10 of Craigslist about 6 months ago. Originally it was meant for my...

So as soon as these became available I had to pick one up. These are so fun to whip around the office on and with a few changes they can really pick up some serious speed. Over the course of the next month or so I plan to completely redo the internals with the goal of having the fastest Mini in...

Just picked up a New Motovox MBX10 for my boys for Xmas. Put it together, checked everything, put gas gas in and it started right up. Unfortunately after running for about 5 min the chain broke. Looks like the master link broke. Called Motovox and they are shipping me a new chain today. I am...

I finely have some free time now that I’m done with college so my #2 boy thought it would be a good Idea to rebuild the Motovox. I’m pretty sure I have every thing to rebuild it. It’s going to be a stock build for the most part. Mainly paint. We’ve already bought the paint so here we go….. We...

Hi group. Bought a MBX10 for my 10yr old son for christmas and liked it so much that I bought a second frame ($109 from Motovox) to modify and install a HF 212cc engine. After reviewing several threads, I decided I did not want to spend $200+ for engine upgrades just so that it would fit in...

Saw this today while I was at Costco. 79.5cc, 23 mph max, front suspension, rear disc. Not for me, someone may like it.

Does anyone know for sure what size clutch goes on a motovox minibike ? 16 MM or 5/8TH"s Thanks, FRANK