oem

I bought first mini bike. to bad it is chinese but whatever. I will take fenders and put lower profile old school tires. What can you guys and gals recommend ? THANK YOU

i have a mb200-2 with 200cc clone motor. i was having problems with water getting into my motor so i added a snorkel and a new air filter i am going to make a new exhaust next. where should i start for jett size? how do i adjust the pilot settings, is an emulsion tube like a pilot jett? where...

I recently posted a thread in the Strictly US Vintage forum of my 1967 Taco 22. I haven't painted it yet mainly because I'm not sure what color to paint it. I am considering painting it the correct color but purple has never been my favorite color. My question has to do with resale value. If...

I can't find one stinking keeper. Who sells them?

Here's a recent problem I just had to deal with and thought I'd share what I came up with. Building a 1970 HS40 and the application calls for the air cleaner mounted high for fender clearance and the use of a Tecumseh/taylor dog leg muffler. The carb that the customer supplied with the engine...

anyone know what it would be? I bought replacement nylon bushings. They seem to have a thread OD of 1.020 ".....but a pitch of 1.0 mm

I have a brand new Fairbanks Morse pull starter. This will fit Some Tecumseh's, Kohlers, and West Bend engines. This is in a Kohler box, but FB made these for Kohler. Labeled FB on inside. This is NOS and has some shelf wear. Cheaper on OldMiniBikes than eBay at $110.00 shipped. PM me if interested

Thought I would offer this here first before going to eBay. $100 plus shipping. THE HEADER WAS NOT CHROMED SO IT WAS MEDIA BLASTED AND REPAINTED WITH HIGH TEMP BLACK. ALL SCREWS AND THREADS ARE IN GREAT SHAPE (RARE)! THE EXHAUST GUARD WAS CHROME AND JUST CLEANED UP, REPLACEMENT GUARDS ARE...

We are trying to cobble together what we have to get it operational... Is there an "off" position on this switch (I.e., no headlight), or is the headlight always "On" and the switch just controls high or low beam? Michael

Hello OldMiniBikes! I have recently acquired a 1976 Heald Super Bronc with a Tec HM80 155042A Serial No. 4169R. My grandpa took it to a local shop to get tuned up and running a few years back. Well, my cousin was riding it and I could tell something was not right and made him shut it down. It sat for...

I want to put a new carburetor on my Clinton engine. Where can a guy find them. It can be new , does not have to be oem. I just what one that works. Mine is just plain wore out. Any help.

(2) Briggs OEM exhaust ($10 each plus shipping) off my 5HP (Brand new / with bolts) $10 plus shipping off my 3.5 HP (brand new / no bolts) $10 plus shipping I have no use for this piece and will throw it in free if you want it...(brand new/ off the 3.5 HP)...

Im having trouble telling if the Honda GX200 OEM flywheel I ordered from a company is genuine OEM or from a clone. How can I tell? I having trouble finding a pic online of an OEM GX200 flywheel online. Thanks, Matt

I'm looking for a fuel tank for the stellar bikes, They dont look like much so they could be mistaken for an industrial tank I would imagine if taken off the bike!!! This is an oem one shown in this photo and what I am looking for:

Anyone know a gas cap that will fit the OEM tank?

Gonna be shopping around for a very nice nos set of 12" shocks for my grasshopper. Doesn't have to oem but will need to very nice. Just seeing what's out there. Thanks

I am about to upgrade as per the title... I am not interested in top end speed or high performance I just want to be able to get up hills... Currently OEM clutch has 11 teeth and the rear sprocket has 75 teeth... I am looking for recommendations for the right clutch/teeth for my...

For sale is a pair of Bonanza mini-bike rear shocks, in excellent working order. These shocks measure 9 1/2" from eyelets center to center when extended. The eyelets fit a 5/16" bolt. Both shocks are being sold as a pair and all mounting hardware is included. One shock has some relatively minor...

Hello All, I have looked over the previous posts on the opinions about these engines, and I understand it this way: 1. They are generally reliable and well-performing. 2. After market ("hop up") parts are virtually non-existent. 3. Customer service/technical support is sub-standard. Is that...

2.8 hp OEM & 6.5 hp clone engines sitting side-by-side