parts

I just picked up a Wards Mini Bike with a 5 HP Tecumseh and it has 10" Wheels with 24 spokes. Looks to be kind of a Rupp copy. I need a rear wheel as mine is badly bent. Also I would like to see some pics of this model when new or in a magazine or catalog ad. Wanting to restore this one as...

up for grabs is a jackshaft assembly,a shifter assembly,and a bracket for same. all 3 pieces need to be resto-ed. look at the Pics Carefully! you probably know more about this bike than i do. you can Barely still see the writing on the shifter too. 175 plus the shipping,or...

picked up this castoff boonie for a build. wondering if the piece shown in pics/the bracket? stand? is an actual part of the bike? and if the rear wheel sprocket is original,as i was going to blast them all and sell the parts to boonie peeps who need them? and what piece im missing off the...

I just recently scored a west bend 820 with slanted spark plug for climbing under a guys car and replacing a leaky transmission valve. he claimed it was used on a boat and has a strange thick steel L shaped mount on the bottom, maybe to bolt to a transom with chain drive to a propeller? i...

I have a 4 hp Briggs block and parts everything is there except the rod and piston, I have the tank too but not pictured. I also have an hs40 I think is off one of the rupps I bought, all internals are there but missing carb exhaust flywheel and coil. This stuff came with all the rupps I...

I have rims and tires, front and rear fenders, rear has bracket, the fronts mounting holes are whooped out, a non original sissy bar and 2 speed jackshaft set up, the teeth are gone on the clutch. Everything listed for $75 plus shipping to lower 48 trades welcome

need a few parts to start a restoration project i just scored. Anybody who has one parted and are willing to sell some parts message me please!

I am listing this for my brother in law. It is an Earls front fork, front wheel, shocks and rear swing arm from a Fox Thunderbolt. He is asking $50 plus shipping obo or trade for Honda mini cycles/parts (CT70, Z50, etc.) If you are interested or have any questions email him at...

I have suspension forks with correct clamps, wheels, seat shocks and brackets, and a really good Arco tank with cap not pictured. Also I can cut the pegs and kickstand off this frame, the disk brake bracket is broken off clean at the weld and will also come with the lot. I want $250 shipped for...

iv been reading alot of threds about people wanting to upgrade there stock hs50s and ohh55s and this is posible but its hard to find preformance parts. in particular there is no known producer for an hs50 billet flywheel or one for the ohh55. the ohh55 did have some preformance parts made once...

I have looked and looked. Even searched around this site. Still needing some parts to my my mini a ripping ride. Anything and any leads will help. Thanks, Dave

Original paperworkall in excellent condition. Wish I owned one of these things....looks like a blast. $12 shipped

Hi Folks, I'm new here but I have a early LIC and need a sissy bar, clutch cover, brake handle and cable. It was purple with black seat. plus advice on restoring it.

Need front fender, kick stand, seat and a foot peg for my new Stellar Black Beauty. I don't think this model had a frame mounted gas tank did it? Also does anyone know the engine options that would have been on this one?

I'm building a bonanza bc1300s. I'm looking for front struts, rear shocks, fenders, tires, seat, tail light, headlight, engine mounts and air filter for hodaka. May also do a bc1400 so if you have seat pan, tank or handlebars for a 1400 I may want them too. Thanks

I'm looking for some very difficult LiL Indian parts and figured I'd try this route again even though it almost never works. The parts I'm looking for are as follows: The last clutch guard that they used which is the really nice one with the embossed center. 4" General tires 2-speed...

Stock motor plate- $5 Stock clutch cover- $8 Stock rear chain guard- $12 (2)Stock chain tensioner rollovers $7 ea Stock throttle assy and cable w/matching hand grips-$18 Stock brake handle and cable- $7 (3)Stock calipers- $10 ea Stock kill switch- $6 Stock foot pegs- $7 pair Stock front rim...

Getting ready to restore a 1970 Maverick Mini Trail and was hoping someone knew who the go to person for parts was. I've searched Ebay and never found anything so is there a source for parts or is it just an almost impossible search. Thank You, Roger Vista,Ca

I need some cat Endura clutch guard brackets and S exhaust pipe. Any and all help would be greatly appreciated. These are the only parts needed besides the seat to have a all original bike Joe

Here are some more parts, USPS shipping in flat rate boxes, shipping not included. Stock mechanical disc brakes - $15 each Stock 70 tooth sprockets - $15 each Stock chain tensioner rollers - $5 each Stock throttle cable - $5 Stock throttle grips - $5 each