picked

I think it's a mid 90's 3 1/2 hp?looking to replace the muffler , Will any 3 1/2hp muffler work?

Just picked up a trail horse but there's no brakes! From what I've seen on line is that they came with a band brake on the right side. I've seen setups on eBay but no brackets, what do I need to do or get to get some brakes?

Picked this up today,owner say's all original. I'm going to need a few parts which I will post in the correct section. Is there new parts out there ? What do you think ? I ran it down the road and the clutch seemed to slip with my fat behind on it. I even got a plate from 1974 with it ! :thumbsup:

Picked up this Rupp today because I wanted to rebuild a bike with suspension. Anyone know how I can find the year. I know it's missing the jack shaft but should it have a rear drum brake. This bike was originally lt blue under the red.assuming the motors not orignal and i know the seats not...

Just got two of these off of craigslist. Fake tank. Not the original seat. No brand name on anything. Both have different engines and both are missing engine parts. Going to put a predator on one.

Hey Y'all, I lucked out on finding a Trike frame for the Kids - What brand and model is it ? Fellow I bought it from (in NC) said he bought it from someone in Maryland. Said it originally had a 3.5 hp motor. Frame is smaller than the ones Gumpit, and Harley's Papa, and Hent have, looks...

I went to pick up some welding rods for my little stick welder and they had a liquidation sale going on. Picked up a MIG170 170 Amp-DC, 240 Volt, MIG/Flux Cored Welder It was an open box special $75 I couldn't say no...I know they are cheap junk but it seems to do the job.

These look like HM motors no? Dont see model numbers though. Would they be under the tanks?

small alsport, thinking a ts30? the body is a bit rough but I hope to get the skin peeled off soon and start the glass work,,, someone torched a section out of the left axle support for who knows what reason so I have to cut that out and form a piece to fit in it and weld it up, once it's...

Hey Fellas, I picked up a T100 this morning. Needs a little repair but shouldn't be too crazy. Serial indicates '69. :thumbsup:

Saw this this afternoon on craigslist. Picked it up tonight. These were photos the seller sent me. No rewelds to the frame. Not the original motor. Seller also gave me the original front rim. I'm happy for $50.:thumbsup:

Picked this Rupp Chopper up off Craigslist right away, got it all for 175 bucks:thumbsup: Should be a fun and easy bike to restore.

I picked this gem today in a barn right outside my hometown. A couple weeks before Christmas my dad told me he saw this mini bike in a barn that is rented for storage by the company he works for. I called the guy that owns the barn and it turns out the bike is owned by his brother so he told me...

know its a mini motorcycle, and not mini bike, but picked this up last weekend, got it running, think the carb needs cleaned, needs to have the choke on a little to keep it running. needs a good cleaning, and a turn signal switch, if anyone knows where to get one, please let me know.

45621s ser2139b its on an edger and is all original. im somewhat confused by the serial number identification i guess the 2 is the year but how do you know the decade. thanks for the help in advance.

The swap meet was pretty slim pickings for mini bikes in general but I did happen to find a couple more NOS Tecumseh engines in boxes today. First is this HS40 which the guy stole the carb off of for a mini bike he had that had a bad carb. I already have a new carb sitting on the shelf for...

picked this lil guy up today. came with a 6.5 greyhound (that will be available shorty). im assuming nothing is original. the frame supports were obviously added (very poorly i might add. any info on I.D.ing this would be greatly appreciated!!!

Check out this sears mini bike. I'm guessing it's a Roper? I could be wrong. I'd love to know the year it was made but that's probably a long shot. Can any one help identify the Craftsman motor for me? I think I need a carb rebuild cause once I fill the tank up with gas it just pours out of...

A piked up a collection of about 15 or so Rupp minibikes today along with a bunch of spare parts and a few spare engines. I still can't stop smiling. It was a good day for minibikes!

I just picked up this cute little Rupp mini bike........missing chain guard and the engine is a Craftsman 143 644031 (H3.5) serial number 41890....otherwise very nice!