plates

Can some-one ID these side / number plates. Thanks

Hey Fellas, I had these triple tree plates laser cut a while back for some forks I was planning to make but never got around to. They are a perfect match for Taco forks but you can use them for any customs forks as well. Made from 5/32" steel just like the originals. $25/pair plus $6 for...

I am building a Mx Bonanza with a H70 with a TAV and needed tall plates. Scooter boy made me a super nice set of plates. After I got the plates I had a templete from a member of tall bonanza plate and realized the swing arm hole is lower. So I used the old copper plate on the back and plug...

Before i make one.....is there any places offering either blank front number plates or possibly reproductions stickers? Seems there were some really neat designs on the front of these bikes

If you have a tilted engine like in some of the rupps do you elevate the front for a few minutes before checking oil level, you would have to right? Also what is the benefit of this design ~ ground clearance? I cant even change my spark plug with this design, I'm going to have to look for a...

Where do you all get your mini replica state licence plates for your bikes? I am trying to find someone who does actually pressed plates like my state's DOT issues but every search seems to turn up decal style plates, some on plastic and some on metal. Is there such an animal as a pressed mini...

Do these restrictor plates for the honda/clone 6.5hp from hotrodminibikes actually work, and if so, how big of a difference? I have minibike with a short wheelbase and when I had a 6.5hp clone on if before, even geared low it would lift the front wheel at 10mph, do you think something like this...

Has anyone put number plates on the Doodlebug? Where can I get some? thanks,

need a set of old ones....

like this one for a 6S? cant read any of it really. im afraid if i clean it at all the rest will come off and ill be left with an aluminum plate with a few numbers stamped in it.....:no: this motor almost complete after a teardown and paint job. gotta put this back on eventually or find a...

I have a old Keystone mini bike and I am missing the round number plate that is mounted on the front on the forks, I am looking for something similar to the white one on the green bike in the brochure. Does anyone know where I could find one?

Ordered these the first week in August and they finally came in Wasted no time getting them on the car. Already had a new frame and cover waiting.

Anyone know of someone that can make or has weld on axle tabs plates. Like these, Bad Dog Enterprises - Mini Bikes, Mini Choppers, Parts, Kits & Assemblies Need them for my Speedway Shrike, I can use a 5/8" axle on it.

Looking at these plates for a project but I can't tell how thick they are...I was wondering if they are 3/16 or the thinner 1/8" ones? Mini-Bike Jackshaft Mount Kit - eBay (item 290422275172 end time Apr-01-11 07:01:41 PDT)

I'm selling these for a friend, thier N.O.S but do have slight rust from sitting in the shop (see pictures). There's no dent's or major pitting at all. He has five left. $25 shipped:thumbsup:

Thinking about getting one but not sure. Get it. It will make the mount stronger. Check out my videos and pictures, it hasn't let me down yet. :scooter:

hey guy i have the clone top plates that you fit to the engine just drill the hole, i can do this if you like, i need them out of my way, so 7.00 each pictures in this thread: http://www.oldminibikes.com/forum/mini-bike-parts/26111-racing-flywheel-clone-top-plates.html

hey guys i got a few things , i figured i would let you have first dibs. this is a 5lb14oz. flywheel for a 5hp briggs flat head. these are balanced for up to 15,000 rpms, has billet fins, and billet magnet housing asking 100 shipped or trade...

need new jack shaft plates for my trail horse minibike the plates look like these ones. anyone know were i can buy them :confused:

I finally have adapter plates for the older DB-30's with the 8 slots in the frame engine mount plate available. The plates allow you to easily mount a 6.5hp HF/clone/Honda engine on the DB-30. The slots in your frame may have to be cleaned up with a file to get the 5/16 mounting bolts thru...