plug

Hey guys its been a while for me here on OldMiniBikes. Anyways, took the bike out today for a bit. Was running fine and then it just started sputtering/misfiring under full load. It didnt stall and I rode it about a quarter mile back home on maybe 1/3 throttle. I looked at the plug and it was a bit...

I have a fairly old Craftsman snowblower (single cyl., 17.5 HP OHV) that refuses to stay running... I had to replace the metal connector from the plug wire to the plug (became damaged) since I removed the plug so many times to check its condition or to unflood the cylinder. Basically, I...

Briggs Raptor 3 tab head, Sandblasted no cracks, Brand new Raptor connecting rod with bolts, New Briggs Gasket, and a NGK commercial grade J19LM spark plug, $45 shipped, U.S. 48. Add another $5 ($50), and I will toss in the raptor cam, (not shown), in Very good condition.

Does anyone have a Tecumseh lighting coil PLUG...I have the one coming off of my HS40 (no problems there)...but I don't have the female (or is it male, lol) end that would connect to the actual mini bike.

I have a baja mini with a gx160 with 18lb valve springs 4 prong spark plug and mikubi carb with 90m main jet. When the engine isnt driving the rear wheel it can get up to full throttle but it cant drive the wheel at full throttlw without cutting out. I tried putting the stock carb back on and...

Was digging around in the back yard and found this old farm tool i was checkin out the gas tanks for use on my mini bike. Anyone know what kind of motor this is? It looks like the spark plug wire goes into a box next to carburetor. The pull start is old style with wrap the rope and pull. I dont...

Hi, I am new to the mini bike world I just bought a used murray track 2 bike off of craigslist yesterday, and it needs a little work I was curious if it would easier to just put a new engine or work on the one that's on it now which is a 3.5 hp Tecumseh. I know it needs a carb rebuild for sure...

Hey guys, Just finished a hectic 4 day paddleing event where NSRI looked after the safety of the padlers. We deployed a polaris ranger side by side on the beach. On day two we were unable to by normal unleaded petrol and could only get 95 Lead Replacement Petrol. I did not think this would have...

in the users manual it says to add a tbsp of motor oil in the spark plug hole. ever do that?

Hello everyone, this is my first post.. I recently built a 212 Predator with the Hemi head and need some help tuning Here is what I did to the build- Removed the govoner Removed the low oil Spenser Installed air filter and adapter Minibike header 18lb valve springs Racing spark...

I picked this 1962 H22 at the Florida Flywheelers antique engine and tractor show yesterday. Its super clean in original shape, I thought this was really cool, the Plug which appears to still have traces of the paint from factory on it is an Allstate, and the coolest thing is the...

Are they worth getting ? Have read some posts where people have had good luck with them and have seen some where they have made an engine run terrible .. whats everyone's opinion ? Will be on a 212 predator with header, kn filter and jet kit

I'd like to hear some of your "tools" you use to get the new welsh plug into the carb nice and flat like from thje factory. In the past I used to not bother with it and hope for the best. And to be honest most of the carbs I've broken down and cleaned have run way better without touching them...

here is a odd spark plug you don't see everyday. as you can see it does not have the standard style spark plug end. the boot end is design to go into the end of the plug. plug is on a AH-58 tecumseh/chainsaw. i believe it is built like this so the end of the plug has a less chance...

Whats the best Spark plug i can buy for a 6.5 honda clone, and does advanced auto parts sell any for these engines:scooter:

Can you just replace the spark plug lead on Tecumseh engines or do you have to replace the whole coil? Does that lead detach on any of the coils of yesteryear anyway?

What is the proper plug gap for a lightly modified Predator 212? The manual doesn't say. I have a Hemi with a header, billet filter adaptor, Uni filter, number 90 main jet, and a .016 pilot jet. After I jetted it today, it felt soft on acceleration. I checked the gap and noticed it was smallish...

Wanting the best spark plug possible for my b&s Raptr 1. Hoping to get more spark for starting engine.

Sorry for the dumb question but I remember reading somewhere that there is a spark plug that everyone uses in the predator that is supposed to be hands down the best. I cannot seem to fine where I read this. Would anyone know wich one it is. Thanks in advance.

why is there a resistor in my spark plug boot, and should I remove it?