predator

March 10-11-12 HF knocking a couple extra bucks off than normal "sale price" top right of page 4 on the ad https://images.harborfreight.com/hftweb/home-page2017/images031017/PLS-031017.pdf

I am a totally mini bike newbie just starting my first project. I Bought a DB30 with a predator already on it last summer, and I want to take the governor out, but I hear it's best to change out the rear sprocket to avoid falling on your ass? The current sprocket pretty much covers the whole...

ok long story short, engine has no governor, billet rod, flywheel, etc, i will be using the stock throttle linkage with slight modifications but the real question is I don't have a conduit holder and was wondering if a substance like QUICKSTEEL/STEELSTIK would work to hold the end of the...

I have 22lb springs , billet flywheel , arc rod , mod2 cam , no govenor would like to know yalls opinions on what carb i should go with . I was thinking of going with the pz27 what do yall think is best for me ?

Welp, I got my max torque 12t clutch installed and predator 212cc motor insyalled after a few minor hiccups and wow, the power difference from stock. Soooo..of course, MORE MORE MORE!!! What would be best stage one kit for predator for the mmb80 that would fit right (with out mods for once) I...

I know most everybody either bypasses or removes the governors on their Predators. They also rejet the carb and put on a header and air filter. My question is will a Hemi 212 Predator survive running at WOT with ONLY those mods? I'm talking about stock rod, stock springs, stock rockers, stock...

Ok cleaned carb got the motor to start with a drill...as the motor idled the starter nut & cup came flying off...i put back on checked my timing put my pushrods & lifters back in..& no start now, i dont remeber if i had a key on my crank...and theres just a little bit of damage to the flywheel...

So today I spent about 5 hours taking the governer out of my predator 212 on my baja mini, it was not nearly as easy as I thought it would be. So now that it's all put together, I have a problem, it will not start, and every few pulls there is a very loud pop noise that occurs, any idea as to...

So first off let me say hi to everyone. I'm new to the mini bike scene and after alot of days researching still have acouple questions. I recently bought a used monster moto mini bike (mmb80) and my fat butt cant make it up a hill at all with this lol so went and bought the pred 212 motor. Now I...

Hey everyone so I've got a problem I've been trying to figure out. So I have a predator 212 all stock on a Baja mini. When I used to take the choke off the engine would just die, cleaned and took apart the carb, after that now a new problem. When choke is on the bike starts and runs fine, but...

I have a Predator 212 Hemi. I started looking for a cam thread but didn't find one. What is the progression from stock to wild as far as cams go? Is there a chart that shows lift and duration of all the cams? How much cam you safely run in a stock 212 Hemi? I mean using stock piston, stock...

Hey everyone, first post to the forum, I just recently bought a non hemi predator for my Margay Expert III go kart build. I have a budget of $600-700 for go fast parts, so far I have removed the governor, oil sensor and plugged all the holes. As far as parts go, I have been looking around on a...

Complete 22mm mikuni setup for Honda/clone/predator . Only slightly used in like new condition . Uni filter , and intake included $70 shipped

Looking to trade a predator billet flywheel for the same flywheel for a gx200. Thanks

This is going to be a Doodlebug build with a predator 212 and 3D clutch. I'm excited to see how the clutch performs, it seems like a lot of people are adding it to their builds. Today we yanked the old motor out and it looks like there are already holes drilled to accommodate the predator (can...

Does anyone know of a source for a nice plug and play throttle linkage for a hemi predator with the governor removed I've seen a few but they all say does not fit the hemi.

If I install White 26lb. valve springs do I need different lash caps or do I use the stock ones?

Hi, I plan on taking the governor off my predator 212 and rebuilding the engine with new parts. Application: baja warrior These are the items I am getting: ARC rod, ARC flywheel, BP2 Grind Predator Core Dyno Cam, #26 springs, HI COMP 14cc heads, new gaskets and mikuni carb. Am I...

I'm getting all the parts gathered up for my build. I like the looks of this header but would really like some advice on how well it works and sounds. Has anyone installed the particular header? How do you like it? How is the sound/volume? It appears the placement would almost dictate the use...

Hey guys give me your thoughts on this build should I go Tecumseh or Predator ? Rebuilt Tecumseh HS40 mostly stock and will stay that way. Or a Predator 212 Hemi head (60363) that will stay governed but maybe some after market parts. OH and I'm a big boy..:anon.sml:.so give me your honest...