raptor

Carburetor and tank off an alcohol-fed raptor. Carb has filter adapter. $50 shipped.

Iv never used a nitro oxide system and need help I don't want to wing it on this one. I have a raptor tilly carb with a manifold. Should I just get a sneaky Pete system and follow the derection? All help is welcome and appreciated. All suggestions are welcome and thank you in advance.

Picked up a Briggs Raptor engine. Should be fun.

Let me know what you have.

Does anyone know the part number for a Briggs raptor ignition coil.

So I was looking at engines for sale and saw this. Would this be a good starting point for a raptor engine? Are these good engines?

I am having a problems figureing out even a part nuber for this thing! I need a 3/4" output crankshaft, the engine number is a 130232 1541 01 (1987) It is ball bearing supported on the PTO side only, uses the old style one way ratchet starter (long snout crank). Need a usable one as mine is...

Hello to all that have decided to read my post. New guy to the forums here. After searching craigslist and ebay for months for a Briggs IC 5hp flathead I have came here in a last ditch effort to find what I am looking for. I wont say I couldn't find any but the ones I did come across were either...

Heres the perfect foundation for your next performance build. One NOS, iron bore Briggs raptor block. The lifter area has been welded for big cams, and the spring pockets are cut. Lifter bores can be chamferred upon request, no additional cost. $200 obo free shipping inside the lower 48, $25...

Hello everyone, Last time I built up my Raptor 2 I didn’t make any sort of thread or mention of it until it was long since complete and running, see the long overdue mention here http://www.oldminibikes.com/forum/more-than-two-wheels-/113893-homemade-kart-belated-intro.html#post954602 The...

Hi there OldMiniBikes! It has been awhile since I have posted anything so I thought a little update/introduction would be in order. Long time regular reader and browser of the site and I have learned so much from all of you and am thankful for being exposed to that knowledge and humbled by being able to...

Welcome to Midnite Minibike Parts: Nice running engine. But one of the motor mounts is gone, (see pics). I took off the carb and tank for my Raptor 3 which needed to come off its alcohol addiction. I used the shroud and starter to make sure the Raptor was OK on gas, and returned the original...

I'm sticking a Raptor on my Old Style DB30 build. I am going to switch from alky to gas. I'm looking at a Tec carb that would go on a bigger Tecumseh, and I'm also looking at the cheap 24mm slide carbs that come on the 50cc pit bikes. Which one do you recommend? I'm not looking for crazy...

Briggs raptor 3. Don't know much about it what I do know is that the guy said it was alky but not sure. Has spark and compression. Has 3 stage header, restrictor plate, throttle kit, air filter adapter and I have a brand new recoil for it. I haven't opened it up to see if there is and...

I want to go with a remote tank on the bike I'm putting my briggs raptor engine on and wanted to know what my options are as far as carbs. I don't want to go crazy price wise and want to keep it as stock as possible. Don't even know if there's any aftermarket parts under the hood. The guy I got...

Briggs Raptor 3 tab head, Sandblasted no cracks, Brand new Raptor connecting rod with bolts, New Briggs Gasket, and a NGK commercial grade J19LM spark plug, $45 shipped, U.S. 48. Add another $5 ($50), and I will toss in the raptor cam, (not shown), in Very good condition.

looking for a 5hp Briggs.... Raptor 1,2,3

I've got a little diversionary project I'm doing that I plan on using this Briggs Raptor for it. It will be repainted. I got this engine back in 2009 but I don't really know that much about it other than it is a Raptor. And it runs! I got a couple questions on it, first is that a stock carb...

Okay, so I've had this Raptor sitting on the workbench for a couple years. I bought an old Kart off of a buddy that had stopped racing, and he sold me his kart, motor, and a boat load of tires and wheels for $300. I didn't do anything with it when I got it because I've always played with the...