rear

I'm looking for some close up photos of a Bonanza MC 250 rear axle. Also looking for parts to restore it.

I'm looking for an 8" rear tire and rim assy with a sprocket and brake rotor already on it. A 6" might get my interest if the price is right... I have #35 chain but I can change that is needed. Let me know what you have and how much you want for it. Pictures are always welcome. Either post them...

Hey guys, I need a rear axle and spacers for a db30 doodlebug. If you have one sitting around and could part with it just pm me! Thanks guys.

anyone have a rear swing arm suspension doodlebug i already converted the front to motovox mb11 forks with doodlebug bars.

Alsport rear

Alsport rear

Alsport rear

Alsport rear

Looking for a buddy that needs one, let me know by PM if you have one and what you want for it. Thanks

29.99 each - shipped pictures are of both sides, slight signs of use, straight and true payment through paypal, thanks :thumbsup:

I have an old Cat minibike (not sure which model). It has a rear drum brake that doesn't work very good. I want to add a disc brake to it. I saw a kit on Ebay that uses the rear chain sprocket for the rotor. It is item number 131305930796. Has anyone used this kit before? Is it any good? I...

I put on the TAV torq-a-verter. Its still geared awfully high, would like to put a bigger rear sprocket on. I cant find anything with the stock dimensions: 40mm center hole, 80mm bolt spacing, 420 teeth. Stock is 50 tooth, would like to go up to 60 or 72, but not finding anything with that...

I have a manco trail cat, and with the photo section down I'm having trouble figuring these things out, looking for photos of original fenders front and rear and how the rear wheel is originally set up. I know there was a drum for a band brake on the right side but was there a spacer on the left...

I hope the picture I tried to attach shows up, but I'm having trouble with my rear axles on this mini bike I just got thru a trade on craigslist, I replaced the tub in the back tire and replace the to bearings in the wheel and now the bolts keep coming a little loose and I don't want to really...

Hey Guys, First post here. I am in the process of building my first mini bike. It is the 6" Azusa kit. When I put the rear wheel on and tighten it down I noticed the wobble in the wheel. It appears this is a common issue. The sprocket appears to be straight and the bearings are in line. Not...

I know its a long shot,but anything is possible GEORGE BARRIS SUPER STOCKER (REAR FENDER) Cash or Trade!

Selling 1 8" tristar wheel with street tire , sprocket , drum brake , cable and lever $95 shipped text for pics 845-505-2198

Have a little mini chopper finally found out that the rear sprocket and the original drive sprocket are T8F?? Either need another rear sprocket or a jackshaft to convert I know there are some people out there that have the little 49cc mini bikes and I know that some of them have modified...

Hello, I'm looking for a 71 and up Rupp rear fender (painted). I don't care if it is cracked, has non original paint or dented. Pm me with a price delivered to 14075. Thanks!

Hello all, Great site! I have an old Manco Thunderbird that I need a rear hub for (dual flange, 7" overall length, 5/8 bearing ID). Thanks in advance for any help! Ken