sprockets

Heres some brand new steel #35 sprockets with a 4.875 ID, 72 teeth and mounting holes are 2.625 apart. $5.00 each plus shipping. Two torque converter pulleys, both are .625 shaft size, one says Comet which is 6.25 OD, the other has no name and has a 5.75 OD. $15.00 each plus shipping...

I was given a Hilliard kart clutch with the sprocket just chewed clean off of it. I figured it was a good deal but now i see sprockets from $15-19? Seems kind of pricey? I have bought new clutches for $29 that use real springs as opposed to the C shaped springs these use. Any thoughts on...

does anyone know where I can buy a larger clutch sprocket for higher speeds?

If anyone is interested, Northern has 60t sprockets that fit the 100 series Peerless differentials. They are almost $60 at Outdoordistributors and $64 at Partstree.com and thats before shipping. Northern was less then $40 to my door. Drive Sprocket — 60 Tooth | Chains, Sprockets + Hubs |...

8-3/4" OD, fits Manco 5" and 6" alloys. $9 each, plus $6.75 Priority Mail shipping.

I am looking for a complete swing arm assembly to fit a BC-1000 Bonanza Mini bike - currently it is a rigid frame on rear and small shocks in front. If anyone out there has the assembly I am in the market to buy. Will need swing arm jack shafts sprockets and bearings.

#1- 53t Rocket sprocket #2- 58t Horstman sprocket #3- 59t Goldspeed skip tooth sprocket #4- 60t Horstman sprocket #5 64t Flames sprocket All drums are lathe-trued NOS Azusa 4-1/2"... All sprockets are lightly used... #1 and #5 fit Azusa Astro, Azusa TriStar, Trail Horse...

hey i got a 5hp briggs flathead "fun power" on my minibike, i need a jackshaft for the chain to line up.. sooo i have a 3/4 inch shaft, i need a sprocket (not a clutch) for it, i have a 11 tooth clutch that will go on the jackshaft, and then i need a sprocket for the other side of the jackshaft...

NOS Azusa 4-1/2" drum sprocket with 72 tooth #35 pitch sprocket... Fits Ruttman 6" alloy wheels with a 4-bolt 2-7/8" bolt circle mounting pattern using 3/8" bolts... Mounting hardware (bolts, locknuts, spacers) included... $23 plus shipping...only two available. Ruttman wheel shown...

NOS Azusa 4-1/2" drum sprocket with 72 tooth #35 pitch sprocket... Fits Manco 5" and 6" alloy wheels with a 6-bolt, 3-1/4" bolt circle pattern using 5/16" bolts... Mounting bolts included... $20 each plus shipping...several available.

they dont get tight. pretty sure one of the little lock bolts is stripped. :-/ anyone know where to get those little bastards(the little screw that comes with a sprocket.)? or.. did you all throw these out and use a better screw?

NOS 60t/#35 pitch 1" keyed bore sprockets... Minor, light staining possible from storage...cosmetic only, does not affect function... I added the missing set screws, but 1/4" x 1/4" x 1" key not included... Five available... $10 each, plus actual economy shipping to your zip...

Will also fit Trail Horse 5-spoke wheels... NOS Azusa 72 tooth/35 pitch sprocket w/ integral machined 4.5" brake drum... I don't have the brake assemblies, but they're readily available from several other sources... Sprockets are $25 each, plus $11.40 shipping...should be able to...

New Azusa 72 tooth sprockets with integral 4.5" machined brake drum... #35 chain pitch... Fits Azusa Tri-Stars without modification...will fit other wheels if you drill the holes yourself... Brake assembly not included, but available from Azusa dealers... Five sprockets...

to run the split sprocket ,what hub ,what wheel ? adaptor plate? thanks in advance!

Three 6" mag style halves,one kart 5" Azusa half,one 5" sensation half,two #35 chain 70 tooth rear sprockets(one drilled,one no holes),six Azusa #35 chain 70 tooth rear sprockets,three band brake drums,one Bonanza rear drum/sprocket for #35 chain(teeth are getting worn)and one live axle 1" bore...

These fit the previous 4 brake drum/3 brake assy that I just posted. These have some stain/corrosion on them,but they are NOS and I believe they are cad plated(or zinc). $40 shipped to you via UPS. regards,Joel

These are NOS I bought off of a guy on ebay about 4 years ago. $30 for all 6 of 'em and that includes shipping to your door via UPS. So................what-r-u-waitin'-for?:confused: regards,Joel

My DB30 with clone is plenty fast. I want to add torque and low end power. I have a Max Torque 12 tooth clutch and the stock DB 70 tooth rear sprocket. I thought I could find a 10 or 11 tooth clutch or even a clutch sprocket, but I can't. I can go to a 75 tooth rear sprocket. Will I be able...

Can anyone tell me what the stock Taco T100 counter shaft sprocket sizes were (number of teeth of each counter shaft sprocket)