suggestions

What size carb do you guys recommend? I might order a carb on Monday for my build. Big bore 208cc clone, CL1 high torque cam, stock ratio rocker, 18cc head with 26mm intake vavle, will have about 9.0+ compression, GXV 160 flywheel with probably a +4* key and a billet rod. Its only a 5,500 RPM+...

Hello, so I havent posted in at least a few years. I had a taco 22, & the similar "zebra" that i was planning to work on back then, but life got crazy so i sold them. Now i kind of wish i could go back & slap myself in the face for that. I am so regretful that it hurts, but i did make some money...

New member here, just bought a used doodlebug for the kids to tear up the yard with. Appears stock, 2.8 Lifan. Runs good, stops good, but obviously lacking. Just ordered a Predator 212 and am planning to build it up over the winter with the kids. I've already gained a ton of knowledge from...

My mini bike's brake was long gone when I got it so I am in the dark as how to get the right one. The replacement "new old stock" sprocket is 72 teeth 5" dia 1" 3/8 depth. It will be welded onto existing hub after old sprocket is removed. Hub bearing uses 5/8 axle. Aftermarket brake set...

I don't mind if you need to make a complaint, i like getting suggestions, but please give me an example. I will not go fishing for your thread that you got butt hurt in, or someone else - no time for that. Just send the damn link to the thread, or out the certain person(s) causing direct, exact...

Super Bronc Seat ... The cover is worn in a couple spots but is good shape otherwise. The wood will be replaced so the cover is coming off. Can anything be done to shore it up?

Hi guys, Been riding our minibike WAY too much! lol SPent the last month fiddling with a Mikuni carb and finally had it dialed in. We have a fairly moderate built Predator engine on an Azusa minibike. Oil has been changed regularly. Current build is as follows for backgroun info Predator...

I have a 1970 H50 ... I bought a new stock piston, rings, gasket set and billet rod. Any suggestions to pump it up a might ... I can shave the head, smooth the intake and exhaust ... how much can be shaved safely? Thanks Kevin

at the moment i have a 72 tooth sprocket on my bike (keystone deluxe) and a roughly 12" diameter tire. it just seems a little close to the ground sometimes, especially if i lean in to a left turn. maybe a 60 tooth would be better in my case. any suggestions?

I'm finishing up my mini bike project, and I have the throttle not retracting smoothly. As in after twisting the throttle open, it doesn't want go back closed on it's own. Any suggestions?

I have a 70's Cat eilemintor, I found this bike when I was kid at my dads rent house. It was just a rolling frame no engine. We took it home and I rode down hills and pushed my self around the yard. And then one day it was gone my dad rebuilt it for me for Xmas. I rode it every where have the...

I need a replacement carb for my H 30 engine. The one I have is shot, any suggestions on a good replacement and where to get it? Thanks

Hey all, just picked up a bonanza bc100 or something along the lines of that.. Looking to get a pair of non stock forks for it as the stock ones are all jacked up. Any suggestions on what route to take?

Allright everyone! I just picked up a Baja mini( I think lol) last night before I went to work, I'm 70 bucks into it. It deffinitely neeDs some tlc. The main thing I'm here to ask about is the wiring. It looks like someone just dropped an engine n it to make a quick sell, basically the whole...

I'm wanting to change my DB rear sprocket to #41 size chain and clutch. Clutch , no problem but don't know what size rear sprocket i need or what will adapt to the wheel hub. Any suggestions ?

I HATE the forks that came with the azusa frame I got. I'm 6'4" and my knees are going to hit the forks. I also feel that with any real speed, they are going to feel extremely squirrelly. I don't really care for how close the top of the handle bars are either. Is there any other forks that...

My stock doodlebug tires are bald. but idk what tires to get. I ride about 50% on streets and 50% offroad. Any suggestions

Sensation chopper. how do I get all the powder coating off? The brake doesn't touch the back wheel either. Need a taller tire and the rim seems to be a little thin. . I am thinking a slick is my best worst choice (the slick looks best and the grip on the scrub brake worst?) but my choice has...

i want to wire a new killswitch on my predator clone. the current stock 1 is hard to reach in emergencys. suggestions on how and what kind of switch

gunna run up to harbor freight an pick up a hemi then come back an order some parts.. Any suggestions? I had these parts in mind 22 mikuni/Adapter billet rod/fly wheel No gov/oil sensor Header 18cc head Black mamba 26lb rings Possibly upgrade the Lifters /push rods I feel like I'm...