thick

Great news! I was able to pick up a few more genuine Tecumseh Thick Exhaust nuts. They are NOS, on a Rupp card. There are three per card. I also have them loose, still NOS but no packaging. 3 on the Rupp card-$25 bucks 3 Loose-$20 bucks. Both prices include shipping. Apparently...

What's the most you have heard of someone milling a Hemi head? An accident at the machine shop may have put me beyond what I can fix with a gasket. How thick is the Hemi head stock as well? Thanks for any info!

I have a HS50 I just finished building for a 67 rupp continental I am building. I would like to replace the thick blower housing with the thin one. I had already replaced the original flywheel with the earlier lighted magneto/aluminum flywheel and just received a thin shroud. First off I did not...

Just got some Sterns piston rings ( 500-017) for my 3.5 flathead briggs. Mod 91202 The stern ring # 500-017 number does transfer to the correct briggs ring # 298982 However the sterns rings in the box are way too thick! the sterns pressure rings are 1/8 to 3/16 inches thick. They will not fit...

got a free bottle of 90w gear oil shits like jelly so i squirted some on the bushing but idk if it was too thick to even get inside the bushing, anyone got some words of wisdom

Im trying to weld some 1/2 in round bar for a (secret) project that im working on lol. My welder can do up to 5/16in and i feel like im not getting good weld penetration and its just kinda sitting on top of the bar. Any tips would be greatly appriciated :thumbsup:

needed new pads for my hydro brakes setup and ran across a thick pad kit from promodraceparts.com. They used a alum spacer and longer bolts to accomidate the thicker pads. Got my kit in and the longer bolts were missing from the kit no problem though. I was taking a look at the stock cable...