torque converter

Making #219 chain sprocket for torque converter.

Making #219 chain sprockets for torque converter.

#219 chain sprocket for torque converter

Torque converters

I've had a lot of requests for instructions and information on our TAV Kit for the Coleman Bikes, old style DB30's and others. I did this quickly on a bike that already had been TAV'd and when I get a another Hemi or do a crank swap on the other Coleman I have, a more complete write up will be...

Ok so i have a drag mini bike...15hp with a tav2 12t. After install i know i need stiffer springs all around. I still have stock doodlebug rear sprocket (70t). To get more top speed would i go up in rear sprocket size or down? I plan on running bike in the 1/8 and before i installed tav2 i...

I have a 212 with around 15hp and im going to run a 40 series torque converter setup but... They dont come with a mounting plate, they run by jackshaft. Would it be possible to mount 40 series on a tav2 plate or is there a reason the dont come with one? Or.. Could i modify a tav2 to hold up...

Would love to learn more about the deal with this bike. I know its mtd. But what kind and year. Also its slow, not sure if the torque converts not working right, but it goes like 8 mph with high rpms. Thanks for any help!!

So I was thinking about getting a torque converter for my MB165 because I've gotten really used to the speed. I have a Predator 212 and a 50 tooth rear sprocket and it does about 25 mph with a centrifugal clutch. The thing has loads of torque, which I love. So if I were to get a GTC TC2 Torque...

Hey guys. I just bought a used CT200U on craigslist, and the thing has ended up costing me some money. I paid $280, than I repainted it olive drab for $20, and bought new jackshaft bearings for $20(the old ones were broken and making awful screeching noises). My little bro was riding it Sunday...

What do you guys know about those cheap Torque converters on Ebay? I searched for TAV and they came up as replacements for the TAV units. The TAVs cost $100 more Obviously they are knock offs. Does anyone here have experience with them?

So I'm trying to finish my mini Baja warrior MB200 but I can't find a place to but a torque converter for it. I thought I had one on eBay but was a fake unfortunately. Just got that sorted out now ready to get one. For real this time Lol. Any ideas?

Im new to OldMiniBikes (first thread) and have been messing with mini bikes for maybe 2 years now. I've been modding and tuning an hf predator on a Baja warrior a lot and am now looking for a major performance increase by switching to a torque converter. Which one should I get?

Hey everyone, I just picked up a crusty old MTD as a summer project. I'm committed to resurrecting this thing. I've never built a mini bike so am starting from scratch. Right now I've got it totally stripped down and cleaned up. My next step is to get the motor/driveline situation figured...

Hi I have a alsport trisport TS-110. It has a predator 212cc engine and I'm looking into putting a torque converter on it.. I am looking for suggestions on what torque converter to get and what specifications it needs (chain size etc) any help would be appreciated.. I can get more info on the...

got a series 40 clutch set.not a comet.brand new never mounted. 1"driver (engine shaft) 3/4"driven shaft size 8hp to 16hp . paid $178.00 this is an extra set i have.selling to fund another project. like to get$150 for it? thanks

How do I take off the driver it's the original on an mod trail flyte ss400 I can't use a puller on it. You can email me back at jrondinelli3@yahoo.com or call me at 201-233-3960. Thanks to anyone who tries to help

Following parts are needed for an MTD model 250 "hardtail" *Torque convertor drive assembly 3/4(Fairbanks Morse I beleive) *TC belt *TC cover engine bracket *Black and white seat needed *HS40 crankcase side cover(type without snap ring) has no id tag, so no spec or serial # is...

I recently purchased what I believe to be a Rupp Roadster 2. The purchase was basically just a rolling chassis. It also came with some Torque Convert parts. I already have a 6.5hp doodle bug with a torque converter so the idea of this purchase is to make the Rupp look nice again and function...

I'm buying my first Mini Bike tomorrow. It's a Baja doodle bug frame and I'm going the typical route of mounting a 6.5hp honda clone on it. It will be used as a trail rider and just for having some fun off road. I have a lot of experience with go karts and engines in general however mini...