tote

Fellow Tote Goaters and others, I'm looking for a solution to replace the stock twist throttle on a Tote Goat. I thought it would be a simple project, but what I'm running into is that the handlebar is 3/4 inch and NO ONE seems to offer a twist throttle replacement kit in anything smaller...

Working on a 1964 model 404 for a friend. I'm pretty sure the belt on it is not the correct size, as the clutch never disengages it. The clutch is clean and seems to work properly, and has a 3/4 inch width opening between the sheaves at the shaft. The belt that is on it now is .90 inches wide...

Model 431 or a 400 model I've been told is the same. Complete Upper Jack Shaft needed. And a Period correct Briggs 5 HP Should be 11 1/4 long. Parts 31 through about 46 in diagram. Any help would be sweeeeeeet!

This is a bike I've had for a while it's a 431 out of all of my minis this is probly my favorite to ride I have put a nos Briggs ic 5hp in it new belt rebuilt the clutch nos brake band new chains motor mount bushings new timken wheel bearings tubes original tires are in great shape new neck...

I recently picked up a Tote Goat locally and I believe that's it's all original. I believe that it's a model 600 but I'm not certain. It does have a Briggs and Stratton 6 HP motor. See the attached picture. The bike sat for 5-7 years with old gas in the tank, carb, etc. I cleaned out the...

tote gote model 750

tote gote model 750

I bought my first Tote Gote. Cost me $50. Not sure how good of deal that is based on what it is but it should be fun project for my son and I to work on. Here are some pictures of it. The last photo shows the accessory rack (not sure what that is) and the kick stand...

For sale: Tote Gote. It's a model 760 with a 7hp Briggs. It starts easlily and runs good, no smoke or noises. Not one penny more than $1,400. Photos: Leroy427's Library | Photobucket I'm in nicholasville, KY 40356. That's near I-75 and I-64. Call 270 -792 -6066. This is a "speak only"...

I must be a hell of a guy. I went to Canfield car swap shop yesterday as there is a 74 year old man who loves the car swaps. He can no longer walk shows so I loaded up the golf cart and we spent the day there. Just as a preface, it seems like we NEVER see Tote Gotes in Ohio. Low and behold in...

Hey guys and gals. I've gote this old bike that's been sitting around. And I think it's a tote gote of sorts.... but I have been unable to find a model that looks like it. So I ask the collective genius of this awesome forum... help me please

I sold my tote gote mini gote a while back and just yesterday I got a call from the new owner. He said he loves the bike, but wants to get a replacement belt for it. I believe the belt that was on it was the original one. While I had it and rode it I noticed the belt was slowly...

I've had this Gote for years and I have run out of room. It is all original Bonham Tote Gote, Nova 670 serial # 659. I have maintained it over the years, new motor mounts , new belt , new engine. It has been in storage for 2-3 years. I just pulled it out of storage after a couple of years and...

How do I take them apart, is there springs and or bushing in them. Any help would be appreciated

Again I need help from you guys, as I have given up looking at pictures trying to id this bike frame I bought roller (no engine) off craigs today. Looks like a tote gote but has frt. suspension?, part of a 40 series torque converter. Help!, THX!.

I just got a tote gote 600 and have questions about restoring it! I have been looking everywhere for what kind of belt it used because it didn't have one when I got it. PLS HELP! first bike. also need help with repair the fork. One side has a lot of play and doesn't "spring" back, how ever the...

I am looking for an original 3/4" shaft Tote Gote Climbaway clutch. (I know, I know, ain't we all). :smile: Trying to get an old Forest Service Gote back up and running but it didn't come with any kind of torque converter. :doah: Thanks

Vintage mini bike Pretty cool.

This is a very rare Gote. The 706 is essentially a model 600 modified at the factory to accept flotation tires on 6" wheels. I have only seen one other bike, pictured below restored by an OldMiniBikes member. This one is rough but mostly complete including both fenders, climbaway clutch and side...