track

New to this site/forum. I have two (2) Murray Track 2 minibikes that I bought for my sons in 2001 or 2002 from Walmart. They have been through hell and back and are sitting in my garage. Both run, but not well. Probably should replace the 13 or 14 year old plugs, plug wires, and clean the...

I've been working on finding a hassle free spot to tune/ride some of the things my sons and I have been working on and a few people from this board have asked me if there's any good places around here since Suburbia has sprawled almost everywhere here. Almost everything is off limits unless you...

I bought a Murray Track 2 on CL for my daughter. Been sitting for awhile so cleaned the carb, new spark plug and got it running and good idle. It seems to be sluggish on take off and takes a bit to get some speed. Maybe it needs a new clutch? I pulled the side cover off and it has a weird...

IM LOOKING FOR A MINI BIKE GROUP, DRAGS OR OVAL TRACK FOR MINI BIKES. I SEEN SOMETHING ON ABOUT LOXLEY , AL BUT THATS WWAAAYYY DOWN BY MOBILE. IF ANDBODY KNOWS A TRACK OR EVEN PEOPLE CLOSE TO NORTH AL (HUNTSVILLE) THAT RACE LET ME KNOW. SOLO RIDES GETTING KIND OF LONLEY lmao LOL :scooter:

Been working on putting a Predator 212 on my Murray Track 2. Those who have done this know that the exhaust is a pain. I bought the do it yourself kit and another pipe from OldMiniBikes and neither was going to work. I don't have a welder and don't know any welders. CarPlayLB pointed me to...

i live in huntsville, al and im looking for a place to race, drag or circuit... Doesnt matter. Areas im willing to travel to: Decatur, birmingham, athens.

Seeing as this new roller ill be picking up doesn't appear to have its jackshaft can i just get a new one in there or do i need to track down the original parts

Yep, vintage minibike racing (and vintage kart racing, we like it both ways ;) ) all day! Race it on the track, or drag it. Easy to comply with rules. What safety equipment you don't already have, you can rent at the track for $5, so don't freak out. Details at: Home Page

real nice examples :thumbsup: Mini Bikes

So cal anyone interested in possibley a get together and ride at willow springsinternational raceway they have a pretty cool kart track and u can ride all over the place there theres evendirt areas to ride for u trail guys but its pretty hilly so tav might be necessarya again just putting...

I am looking to buy another Murray Track 2 in Georgia. Willing to travel up to 50-60 miles to pick it up. Let me know what you got. I am located in Conyers Ga.

Murray Track 2 $500.00 OBO (((((( NO SHIPPING )))))) I will be bring this to Windber and will work with your shipper :thumbsup: Don't ask me to box it up and ship it because it wont happen :doah: The Good New wheel bearings 212 Predator Hemi (rejet and air cleaner and header w/muffler)...

Murray Track 2 mini bike. 3.5hp tec runs good. Tires are in great shape. Needs neck bearings. $225 no shipping. Can deliver to winber if paid in full.

Picked up a Murray track 2 off Craigslist for $100 and it runs but has a busted throttle cable and kill switch. I cannot find parts for this thing. I'm in need of the twist throttle handle, new pegs, neck bearings and I wanna ditch the 72th #41 chain sprocket and run a #35 on a 60-66th rear. Can...

Hey everybody, My name is Brandon 31yrs old married father of 4, union distiller, back yard gear head fabricator. Been building air-cooled VWs since I was 15, have had over 150 vehicles in the past 16 years. I guess you could say its my vice, wife hates it. But i tell her its better than...

I bought a Murray track 2 last week and rode it most of the week end. Then found that the forks were a little wobbely. Took the nut off at the top and not what I expected. There is a lot of play and that needs to be fixed before I do an engine swap. I tried searching thought the forum for a...

Here are some pics of my Stock Track 2 :

Has anyone ever replaced their mono shock? What did you use?

Hey guys - very now to this. I have been thinking about building one for a couple years. Looks like a blast. I have been considering the TAco22 and Bonanza frames. Both look great. Also like the Murray Track 2 frame but can't find one. Am I on a good track or a slave to advertising...