Looking for a 10.5 x 4.5 - 4 inch tube for the front tire of a Lil Indian.
Suggestions or help. I live in Connecticut so maybe some local places that might carry them.
Thanks
Nick
Looking to make my own frame wondering if any one has any good info on a tubing bender that wont cost an arm and a leg to buy any help would be great thanks
i have 1994 briggs 3.5hp that has a half brass and half plastic pick up tube on the carb that goes into the fuel tank. how do i remove that? also the plastic piece has a crack in it. how can i repair that? it will be in fuel and dont know what to use. thanks
I am trying to ressurect a 1980's 4hp Briggs horizontal shaft engine that came off of a shredder/chipper. In its current set-up, the only speed control is an adjustment on the governor spring, and for choke it has a slide choke "piston" at the end of the carb.
When I got the engine, I was...
I have 3.00/10 tires and I cant find tubes that size with straight valve stems:out: I can get 2.75/10 or 3.50-4.00/10 do you think either of these will work?
Thanks Randy
Hey Everyone,
I am Duke and I just bought my son his first minibike. I have taken a couple of photos.
We have taken off the seat and the carb and fuel tank.
The previous owner said that the fuel tube was clogged.
Any suggestion on how this tube comes out, unscrew it ? press fitted?
It...
hello i have a 6 hp hh techumseh and when my son rides it there is no problem. but when i beat{ride} it the engine is always covered with oil. i ride full bore and im a big guy .
I had some spare time today due to the rain. Here's something that
I did save a little money, and I like building things from stuff laying
around my shop. My homemade vent tube breather filter.
Step 1 -
Find a party popper.
Step 2 -
Take it appart, DO NOT PULL THE STRING! It will...
I've been having a lean problem on my 6 HP Powersport. I'm thinking the end of the plastic emulsion tube that protrudes into the throat of the carb is closed off.
Is this supposed to be open? I'm thinking it is. How else would it draw fuel from the bowl?
If it is supposed to be open, any...
Yo dudes!
I picked up a new K&N filter that fit nicely around the stock air filter housing mounting points. In doing the swap, I also removed a ~3 inch rubber tube that connected from a port hole on the engine to the filter housing...
With the new K&N in place, I was unable to get the 2.5...
Anyone bend up their own frames for minibikes or fullsize motorcyles?
Wondering what you used - bender and steel size/type.
I've had some experience building tube-frame vehicles for the University of Wisconsin-Madison. Trying to see what's out there for home-owner affordability in tube...
Just recieved a new flathead tec 5 hp. for my tt500. Its
a snowblower type with a long dip stick tube sticking straight up and it just barley slips in the frame. Question??? Can i shorten it,,if so how? Are what are my alternitives??
thanks pete
i still dont have a definitive answer as to what this bike is.several people have tried to help.but,when i look at pics they say it is i always see something to say it isnt it.so,if anyone has seen this bike or has a pic that matches.please put my weary mind to rest.i just want to know exactly...
hey gents, just looking through the AGK webpage, Affordable Go Karts - Home page - AGK - http://www.affordablegokarts.com and was wanting to rejet the carb on my 5.5 clone. They sell a #90 jet and emulsion tube. Has anyone done this? worth the money? or is it a waste. Thanks in advance. BTW...
has anyone used the gx140 tube on the gx 200(clone)??
I have a clone with a header,rejetted, gov removed, stock springs, and I was thinking about a couple more little upgrades .
wondering if it is worth it.
I know it isnt that expensive but I would imagine I would need to re-tune after this...
I saw a video on youtube on the removal of the Governor from a 6.5, is it safe to remove it or is it easy to blow the motor with it removed
Thanks :gun_bandana:
How do you guys bend your tubing? I noticed that HF has a "pipe" bender on sale for 69.99. The owner's manual was laying along side of it and I decided to Evelyn Wood speed read it. There's a warning in broken English in the manual concering the possiblity that the bender may kink or split the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.