upgrade

  1. 6.5 champion

    what else can i do???

    i have a 6.5 champion motor and i put a cool lil pipe on it and a racing carb. on it what should i do next?? also i need a filter for the carb where can i found 1 at?
  2. ProMod

    Baja Heat and Warrior Jackshaft upgrade

    I now have the PMR Jackshaft Plates set up to work on the Baja MB165 Mini bikes too. The standard setup will change the gear ratio from the factory 10-1 to 8.5-1 for increased top speed while still retaining a good takeoff speed. Optional ratio's also available on request. MB165 Jackshaft...
  3. TT

    Someone was asking about a 265 camshaft?

    After, I do the initial testing on this new Ding Dong 6.5 HP motor that has a 265 cam. The cam will be for sale. I will upgrade to a 275+ camshaft. So, if sombody is interested, let me know? It will be priced right.. It is from AGK and no grinding is required...:hammer: TT Out~
  4. ProMod

    Rear Hyd' Brake Upgrade

    For those who are interested I have the direct bolt on Hydraulic brake systems for the Baja DB30 back in stock plus a few more common DB replacement parts at Baja Doodlebug,Dirtbug Performance and Repair parts The PMR Jackshaft Kits were a little more popular than we anticipated this Holiday...
  5. M

    Anyone try this carb upgrade on a 2.8 97cc?

    Hey guys, I saw a post about this carb but I can't find it now. Sorry if I'm being repetative but I wanted to find out if anyone has actually tried this carb upgrade on the stock 97cc like the ad says it's for. On sale for $30 bucks now...I just might try it:) Someone filed down the black...
  6. thebronc4019

    Harbor Freight Pressure Blaster Upgrade

    15 Years ago I bought a Harbor Freight pressure blaster to build my "Pro-Street" 1967 Nova. Since then I have used it on a number of car and minibike projects. I originally put a better water seperator on it and re-welded the leg on the bottom of the tank. I have had to replace the ball valve...
  7. R

    Upgrade

    Hello to CJTmini, I have two new doodlebugs in the garage, both in dire need of your kits and/or engines. Can you PM me or email me at rwmichu@msn.com - email would be better. Thanks, Randy - rmichu
  8. C

    Clone upgrade path

    I was doing some surfing on AGK's website and my wallet started to ache. I was thinking about doing some mild upgrades as outlined on their site. I already have a custom exhaust on my DB, so I was thinking of adding the following. Air filter kit #90 fuel jet Governor removal 4deg...
  9. AllTorque

    Upgrade from clutch to TAV

    My clutch is shot, but I don't want to go with another clutch. I'd like to upgrade to a TAV type drive. What would be the best way to do that with the set-up I have (see image). I was thinking a drive pully on the engine and a driven pully on the jackshaft. Does anyone know a good reputable...
  10. S

    Upgrade to 3.5HPmotor

    Hi out there, I am a newbie to the mini bike world. I just bought a DB at the portland swap meet and it came it with an extra motor. The motor is 3.5 hp briggs. I know most are upgrading to the clone motors but for the price I will start with bad boy. Anyone out there put one of these on...
  11. madmaxthemic

    6hp Intek upgrade progress

    I got everything removed and started fabricating a mounting plate to raise up the Intek motor a bit and reinforce the exsisting mounting plate. The valve cover is close to the rear fender if not raised up. I got a new 60 tooth sprocket and when I removed the old one I found that the center hub...
  12. madmaxthemic

    Doodle bug 6hp intek upgrade

    Just started today on the installation of a briggs 6hp intek. I might even smash the original with a sledgehammer and video tape it for everyones viewing pleasure.
  13. suicycle

    definite doodlebug upgrade

    :thumbsup:look up moose mini bike, you'll see its a doodlebug with a new set of front forks with springs.
  14. F

    Engine upgrade

    I there any kit for the db that is "so easy a caveman could do it"?
  15. Jerrymax

    helping with the upgrade db30 2.5 to 6.5

    Hey, Im glad to have come across to this site, i need some help !!! in a few days Im going to San antonio (from mexico) to get a new db30, but i wanna do the upgrade, so i know the original cluth will not work with the 6.5 hp, but what about the original chain i think is # 35, do i need to...
  16. T

    WANTED: sprocket upgrade for db30

    anyone have a precut sprocket for stock DB30 they want to sell? need an easy mod for for more torque. also anything else need for mod. (ie chain)
  17. J

    Contracting out 6.5 upgrade job...?

    Iv'e been on here before mentioning the importance or need for bolt on db parts. These being the bolt-ons or upgrades catering to the mechanically impared like myself. Wondering what you tinkerers would charge someone with 6.5 clone in hand to throw one on a doodle? And part two of my question...
  18. D

    Best single upgrade to a DB30?

    Got another DB30 today to keep the first one (green bike) relatively stock for the boys as a learning tool. The green bike has a pretty good running engine, and I'll keep the other engine as a spare. Also picked up a 6.5 HP motor at Harbor Freight today, and ordered a max torque clutch for the...
  19. DB30 Upgrade 1

    DB30 Upgrade 1

    Stripped down DB30 with upgraded 6.5 HP engine.
  20. C

    motor upgrade

    Hi Is CJT Mini still selling his upgrade kit??? I could not reach him by email
Top