vt-5

  1. R

    VT-5 Trail bronc super bronc in NJ

    I am selling a vt-5 trail bronc it runs but needs finishing work has a non original hs50 that runs pretty good and does not smoke and has a lighting coil and you could hook up electric start also.Has torque converter and the brake set up and they work tires are original and hold air but do have...
  2. Cap'n kanuckles

    Super broncr vt-2 complete bike part out

    Parting out complete bike will sell whole bike for $locally will disassemble part by part and ship Seat bracket not attached to seat that's why shocks are on a slant
  3. Karl Childers

    Heald VT-5 Restration

    I just found this last monday on craigslist for $400. It has most the parts, minus an original motor with lighting. I was thinking about running lights with a 12v mower battery, has anyone done that? Gonna try to get the motor running today, the carb is haunted :confused:. The jackshaft has a...
  4. Acolytus

    Heald VT-5 Trail Bronc roller for sale

    Well this may be an exciting day for you fellow mini bike enthusiasts because I'm selling my Heald VT-5 Trail-Bronc! All original as far as I can see- original seat, both fenders, wheels, etc. Neat bike, but I'm selling it cause I have my Mopars to work on. Hate to see it go, but hopefully...
  5. matt2

    Rear Wheel similar to Heald VT-5

    Hi everyone I am looking for a rear wheel that's similar to a Heald VT-5. I want a complete tire wheel and sprocket for 3/4 axle. I want it about 18" top to bottom and up to12" wide including sprocket thanks. The chain size does not matter as long as I can get a drive gear , sprocket to match...
  6. matt2

    1979 Heald trail bronc VT-5

    Hi everyone I'm looking for shock boots for the front of my Trail Bronc thanks.
  7. trailbronc

    trail bronc vt-5 roller

    well guys i guess i am gonna sell my bronc...i am trying to get a street bike and need all the money i can get...the paint and seat are a little rough, and it needs a motor and throttle cable to be ride able...it comes with the clutch muffler, thing that comes off the engine to mount the muffler...
  8. chatten63

    Heald VT-3 or VT-5 rim

    I need a rear rim for a VT-3 or VT-5. 18"x8" rim with 3 bolt pattern flange. Thanks Rick
  9. KNUCKLEBANGER

    Heald bronc vt-5

    I have a very clean, nice original heald bronc vt-5 that runs great. The bike has the optional speedometer showing 219 miles. If you are into original machines and don't want something that is restored, this one is pretty nice. I am asking $800 [/url]
  10. YOOP

    Heald vt-5

    PICKED UP A HEALD VT-5 AWHILE BACK.JUST A ROLLER.CLEANED IT UP,STRAIGHTENED THE FORKS AND PUT A HS-50 ON IT.A TAV COVER CAME WITH IT. I THINK IT IS THE CORRECT ONE FOR IT BUT I'M NOT SURE,IT SAYS HEALD ON THE INSIDE.JUST WONDERING IF A MEMBER WITH ONE COULD TELL ME IF IT IS THE RIGHT ONE AND IF...
  11. G

    Heald VT-5 Rear Fender

    Any one out there have a rear fender for a Bronc VT-5 for sale? Thanks
  12. 2010_1220carb0017

    2010_1220carb0017

  13. minibikedude

    Heald VT-5 Basket case.

    I found this roller Heald VT-5 bike on CL and bought it. It does have straight handle bars and forks so that good, I,m going to need a jack shaft plate for it to make the brake work, If anyone has one they want to sell,also foot pegs,seat,fenders let me know. I did talk Ron and have new axles...
  14. Super Bronc

    WTB: Heald VT-5 Front Forks ..

    WTB; Heald VT-3 or VT-5 Front forks .. Are they the same ??? Mine are bent pretty good , don't know if I can find a set of forks or if mine can be straightend .. ANY HELP IS APPRECIATED !!! :confused:
  15. S

    Heald VT-5 parts

    Here is what I have of a VT-5. The primed parts were all bead blasted first, then primed to prevent surface rust during storage. The fenders had some rust , so I had the chrome stripped first. The handle bars have been re-chromed. $125 + shipping for all of it. Might consider parting it out...
  16. P

    VT-5 Jackshaft Bracket

    Fellow Heald Enthusiasts; The attached diagram was drawn up by 64fairlane and shows the dimensions on a jackshaft bracket for a Heald VT-5...for you self fabricators.
  17. S

    Heald Trail Bronc VT-5 Help

    I picked up this Trail Bronc VT-5 chassis the other day. At least that's what I think it is. I don't know why I bought it, but I know now. My 13 year old daughter slid some ATV tires under it and said "this'll work". I can't say no to my girls. Anyway.... does some one have pictures of the...
  18. jeep4me

    Parting out a Heald VT-5

    Parting out a Heald VT-5 Trail Bronc. Chrome fenders: decent shape, some spotted rusting. Front and rear $45/pair. Front wheel assembly: includes hand lever, drum brake and tire. Working condition, $40. Comet TAV 30 and jackshaft assembly: includes covers, bearings and some misc. pieces. NO...
  19. VT-5 Super Bronc

    VT-5 Super Bronc

  20. VT-5 Bronc

    VT-5 Bronc

    Modified rear tire and removed the original torque converter.
Top