7 or 8hp briggs and Stratton

[t555trailblazer]

I need a seven or 8 hp Briggs & Stratton with a crankshaft 2 3/4" long by 1" in diameter. In good running order. For a tote goat project.

 

[JKautoFab]

ive got a couple 1 inch shaft 8 hp briggs. dont know if it would be worth to ship but i have them

 

[t555trailblazer]

Shipping is always a problem with something that heavy. I do have eight horse Briggs but the crankshaft is too long. I need one with a two and three-quarter inch long crankshaft to make the jack shaft system lineup.

 

[JKautoFab]

cut off the end!

 

[Robertt8883]

i have a 9 HP briggs Flat head

I have a Briggs 9 HP
One inch 'Diameter Shaft Keyed
2 7/8" Long
1953 Briggs 9 HP Flat head
$100 plus shipping

 

[t555trailblazer]

Aside from the crank beig too long, it also when from 1" to 1 1/4" when it gets closer to the crankcase. The torque converter needs to fit tight to the crankcase to line up. I just purchased a 1979 briggs locally with right size crank. Thanks everyone