8inch front rim & tire info......

[IJG]

Gm OldMiniBikes '
I need to know what 8' rim & tire i can utilize that is at least as wide as the 6 inch stock 145/70-6.
& it needs to fit into the Motovox mbx11 front shock ?
anyone have this answer or photo to show me ?
im saying , does this ..https://www.OldMiniBikes.com/480-8-2PLY-2Ply-X-Trac-Carlisle.html?category_id=22
fit this ..https://www.OldMiniBikes.com/8-AZUSA-Tri-Star-Wheel-3-Wide-AZ1152.html
& will the spacers be needed to custom cut ?

 

[chipper]

That will work but will not be quite as wide as stock 6" , also that is a not a great choice of tire for the front , if you want aggressive tire go with the sno-hog and yes you'll need to cut spacers and you'll have to get the right wheel bearings or drill out the forks for a 5/8" axle !

 

[IJG]

is their a easy button?

 

[Twid]

Those tri star wheels need a bit of finesse. Not the best casting job on them. I don't remember who but there is a thread on here about it.

 

[IJG]

that figures , what about these 2?
4 stroke and 2 troke X7 8 inch Front Rim, racemotorparts.com
4 stroke 110cc Super bike X6 2 stroke 49cc X8 Pocket bike Front, racemotorparts.com

 

[FirePowerMinis]

Honda Z50 stuff?

 

[chipper]

that figures , what about these 2?
4 stroke and 2 troke X7 8 inch Front Rim, racemotorparts.com
4 stroke 110cc Super bike X6 2 stroke 49cc X8 Pocket bike Front, racemotorparts.com

those are probably compatible w/Motovox as both are Chinese !

 

[IJG]

well, i just wanna get the front end up a bit. was hoping for things to be simple ,I'll just replace the front tire with a new one. thanks for your help fellas. much appreciated. if anyone finds a mbx11 front end with an 8 inch rim & tire fitting on it, please send me the photo.