Bullet proof throttle control need recommendations

[Latent]

So I had the stock db30 throttle control on my modified doodlebug, and the twist grip twisted clean off (break at the white plastic)

I'm looking for a throttle control that can take abuse. Was looking into dirt bike throttle controls 7/8". Anyone have any recommendations for one? Seems like you guys know best. Do they make any controls that don't use cheap flimsy plastic?

 

[Latent]

Basically looking for a CNC throttle set up, but also wondering what size my cable is... 9mm or 10mm or ? I got the mikuni kit off gopowersports, but want to properly pair the cable with the throttle control.

here’s some pictures .. no digital calipers to measure.. coming in at just over 1/4”

looks like 7 lines on the tape = 7mm??

 

[Kmanator]

looks like 7 lines on the tape = 7mm??

Yer tape measure is in "Inches"...7 lines would be 7/16 of an inch or approx 11.1125mm

https://www.google.com/search?q=inc...7j0l2j69i60.6978j0j4&sourceid=chrome&ie=UTF-8

 

[Mrmonk7663]

Studz has a cnc housing. It’s around $40. I use it with my mikuni. Works great. Very smooth.

 

[Latent]

I went with this throttle control off ebay. Apparently its CNC billet.

http://rover.ebay.com/rover/1/711-5...0001&campid=5335845805&icep_item=254012521045

 

[Mrmonk7663]

That’s the same one studz sells. Good job finding it cheaper!!

 

[Addicted 2 Minis]

Just be careful tightening the inspection cover screw, seems like the spacer for cable roller is too short on some brands and ends up cracking the cover.

 

[Mrmonk7663]

Yah I had to space mine out.

 

[DaddyJohn]

The Magura 314 throttle assembly is great quality unit for around $21 on Amazon.

https://www.amazon.com/Magura-Motocross-Enduro-Throttle-226385/dp/B000GTU410