Dual Speed Max Torque Clutch on my Fox??

[ClipperBuggy]

Working on a Fox Trail Tramp/Trail FX.

I found this clutch: https://www.OldMiniBikes.com/Max-Torque-Dual-Sprocket-3-4-Clutch-for-Two-Speed-MiniBikes.html

I am thinking about trying to get it to work on my set up.

Fox Spoke wheel bike as mentioned with a Tecumseh HS40 motor.

anyone know if this will work? will the positioning be right?

 

[markus]

wont work with the fairbanks morse 2 speed driven and probably not enough room to get a comet 2 speed to fit, you would most likely have to mod engine placement and open the slot for on the plate for the chains to pass through.

 

[ClipperBuggy]

That's what I thought, would need to mod the bike, not looking to do that.

I'll have to use just a single speed clutch.

Looking at this: https://www.amazon.com/gp/product/B00RXPZRGC/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=AZWJFRUR9E0CM

Pretty sure that will work with my Tecumseh HS40 with Keyway & my 4 inch band brake.

 

[markus]

Yea, thats the right/stock tooth count as well

My info shows 12t clutch to 20t input to 12t (trail) or 15t (campus) output on the FX single speed models

 

[ClipperBuggy]

oh nice, that is really helpful!

Thank you

 

[ReapersRide]

Do you want or need a photo of an actual Fox 2 speed clutch?

 

[billybiker]

I know where a vintage new in the box two speed clutch for 200.00 for a Fox Street Scamp if interested

 

[ReapersRide]

Is it as bid on Ebay?
Reaper