Finally finished this build. It was tough, one thing after another but it's finally done.
I know people are going to shun me for what was done to this frame but unfortunately there was no other way. Too many parts were missing and someone already took an angle grinder to the original jackshaft and engine plates.
The engine mount was removed, repositioned and rewelded to allow clearance for the chain on the left side (Originally being on the right side)
The wheel was realigned and a larger sprocket was drilled and added to enable the bike to move with that small 2HP Briggs.
The original fork set was a wreck so I bought a set off a member here. The original fork set has been repaired, just needs paint.
I know people are going to shun me for what was done to this frame but unfortunately there was no other way. Too many parts were missing and someone already took an angle grinder to the original jackshaft and engine plates.
The engine mount was removed, repositioned and rewelded to allow clearance for the chain on the left side (Originally being on the right side)
The wheel was realigned and a larger sprocket was drilled and added to enable the bike to move with that small 2HP Briggs.
The original fork set was a wreck so I bought a set off a member here. The original fork set has been repaired, just needs paint.
Last edited:
