Footpegs For Trail Horse?

[Demerest]

Previous owner installed tacky 3/4 inch black pipes for footpegs .Must have drilled the holes in the wrong place plus they are too short..Any recommendations for aftermarket or else correct DIY dimensions?

 

[RobertC]

Hey @Demerest ...welcome to the Oldminibikes.com forum.

Post up a picture of your bike, and let's see what you're working with.

Many of the manufacturers used the same dimension tubing as the rest of the frame.

 

[Skipp]

Trail Blazers are 7/8” mine are 6.5 it has a h50

trail horse are 5.5 and 7/8” and it has a hs40 both bone stock

I bought 7/8” pipe and made a set for a bonanza mx so I could extend them a tad…trick is the angle so they will fold….i didn’t get it correct but it works for me….

 

[Demerest]

Hey @Demerest ...welcome to the Oldminibikes.com forum.

Post up a picture of your bike, and let's see what you're working with.

Many of the manufacturers used the same dimension tubing as the rest of the frame.

 

[RobertC]

Hey y'all...can someone give @Demerest a positive ID on his bike.

To me, it looks like a trailhorse of sorts, but I don't know them good enough. Nice looking bike BTW.

Once we get an ID, someone more familiar with your brand will advise on it.

 

[Skipp]

Looks like a trail horse wizard

 

[jondan]

.

 

[Skipp]