Fox Thunderbolt 125

[Rooster63]

Flywheel Installed.

 

[Rooster63]

Shroud Installed. Yippee.

 

[Rooster63]

New Air Filter.

 

[Rooster63]

Springs sitting in Evapo-Rust.

 

[Rooster63]

Seems to work.

 

[Rooster63]

Not Great but, way better than what they were.

 

[Havasu Dave]

Coming out great!

 

[Rooster63]

Coming out great!

Thank You, Dave. Took quite some time.....and Money, to FINALLY start seeing Light at the end of the Tunnel.

 

[Rooster63]

Forks Assembled.

 

[Rooster63]

Handle Bars installed.

 

[Rooster63]

Attached to Frame.

 

[Rooster63]

Fenders Installed. Ended-up not using them.

 

[Rooster63]

Fuel Line and Clutch installed. End-up not using the Fuel line. lol

 

[Rooster63]

New 4-Ply Tires. Now THIS was a fun job. NOT!! 1 Pic has the Tube inside of it, aired-up, trying to get the damn Beads to give me some room to play. Just wouldn't happen.

 

[Rooster63]

My Jig, to hold the Rim, while I gave it Hell to install the Tires. End-up having to put BOTH Beads on at once. THEN, get one side of the Tire back OFF, so that I could install the Tubes. THEN, get the one side of the Tire back ON, w/out pinching the Tubes. ANY where that I called, to have them installed, were aware of the struggle. Cheapest place that I found was $50 EACH, to install. Long Story. PLEASE, DON'T ASK. lol

 

[Rooster63]

Not as Rusty as they look. Camera does some weird crap.

 

[Rooster63]

Not sure if anyone remembers but, the Spokes just HAD to be bent on the one side of the rear Wheel, to clear the Hub. They were all bent the same. Trued pretty darn close. I did the Truing. 1st Wheel assembly that I've ever done. Happy for the Experience.

 

[Rooster63]

Rear Wheel. Again, not as Rusty as they look. Not NEAR Perfect but....

 

[Rooster63]

Sprocket Installed.

 

[Rooster63]

Rear Wheel installed.