gov arm

[agression]

are the rod lengths the same on all 3.5's? will my side popper arm work on another 3.5? rod that runs from gov arm too top of carb. what hole should it be in? top middle or bottom?

 

[zeeman]

Not sure about the length, but there is a thread with pictures showing Tecumseh throttle hook-up somewhere.

 

[zeeman]

http://www.oldminibikes.com/forum/photopost/data/500/medium/Tecumseh_Scmatics1.jpg
See if this helps. Seems like I remember the fourth hole as the correct location for the spring. I'd have to go check some of mine out.

 

[buckeye]

4th hole is correct and where the hell ya been zeeman?

 

[agression]

thank you guys

needed that,thanks... had other motors,where it had been in other holes... never bottom,just second to the top....

 

[zeeman]

Hey Buckeye, I've been away for a while. Preoccupied I guess with job hunting and working on some of my other stuff besides minibikes. I have an old Volvo that needs to be resurrected. Also been doing lots of work on friend's mowers etc. Thanks for thinking about me. I'm well.

 

[agression]

volvo

hey zee,what model volvo you workin on??? like the volvo's..:smile:

 

[buckeye]

good

 

[zeeman]

I only have two left from my fleet 5. The one I'm working on is a 1982 240 non-turbo. It just quit while running down the road just fine. It has me puzzled for the moment. Do you have any bricks?