My Champion 6.5 measures about 13 1/2 inches from top of gas cap to the bottom. I put one in a nova mini which looks like a small Cat. Remember you still need to get the cap off once its in the frame. My frame measured 14 inches.
Haven't tried it yet and just got home soooooo this ones for you. :thumbsup:
This is my messed up "project" cat and is the small frame.
The gas cap drags going in (but fits) so another tank or a change of the tank position will be needed.
you'll need a longer foot peg on the right side.
And I didn't have a chance to check the rear tire clearance but it should be ok though tight.
Sorry for the bad pic's but hey I just got home from work and I don't give a rats! :thefinger: Give me a few days and I'll swap engines with my other one.
The Tecumseh 5HP would work great and if you go that route, get the one where the carb isn't in the gas tank. Thats what I want to use but I may stuff a Briggs or Honda clone in this blue one and seperate tha gas tank and remove the carb cover. GTO
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.