Im thinking on swapping a hs40 head onto a hs50 motor i have installed on my scrambler.
Even though it already runs great aren't we always looking for more.
Before pulling anything apart i figured i should ask.
Does this work?
Does the 40 head have a smaller chamber than the 50?
Will it increase the compression?
If this swap works
which head gasket should be used?
Even though it already runs great aren't we always looking for more.
Before pulling anything apart i figured i should ask.
Does this work?
Does the 40 head have a smaller chamber than the 50?
Will it increase the compression?
If this swap works
which head gasket should be used?