Mekuni carb leaking

chrisr

Active Member
#2
You may want to check the float and/or needle/seat. Was the gas being fed to the carburetor via gravity fed or some type of vacuum fuel pump attached - if so, either of these should not overwhelm the float/needle seat, but an electric fuel pump can depending on the PSI.
 
#3
You may want to check the float and/or needle/seat. Was the gas being fed to the carburetor via gravity fed or some type of vacuum fuel pump attached - if so, either of these should not overwhelm the float/needle seat, but an electric fuel pump can depending on the PSI.
I'll check. Thanks. it was gravity fed
 
Top