mikuni carb tips

[mbdutch]

So I have a 22mm mikuni carb on the way for my 212. It has 26lb springs flywheel rod isky cam. Any tips for when I get my carb? Can I just built on and start?

 

[125ccCrazy]

you'll certainly have to play with the jetting and mixtures.. it won't be spot on out of the box..

 

[6.5hp Shinebox]

Save all your headAches and money....take it and get Dyno tunes Best way

 

[David wulf]

Save all your headAches and money....take it and get Dyno tunes Best way

What is dyno tunes best way ?

 

[ole4]

get a 130 main jet that will get you close. Pilot stock Is usually a 15 and it may work just fine. I have used 12.5, 15, and 17 pilots. Try the stock one and if you can get a good idle with the idle air bleed adjustment between 1/2 to 2-1/2 turns out your fine if you have to go an less than 1/2 turn then go to a smaller pilot 12.5 or if you have to go more than 2.5 turns out you need to go richer to a 17 pilot. hope this makes sense.

 

[6.5hp Shinebox]

What is dyno tunes best way ?

They use a Sniffer......test the gas air mixture with a computer ....Doesn't get any better than that ..You could change jets all month long And you could get it to run sure....But run Purrrrfect? NO...those jets are pricey & so is my time ..witch you are gunna need,plenty of!

 

[thejoker]

AGK - Carburetor Tuning - Affordable Go Karts
maybe this will help.

 

[mbdutch]

Cool thank every one in hooking it up now

 

[mbdutch]

What's the best way to find a place to get dynoed

 

[mbdutch]

So I ordered the jets for it came wait to see how it runs