Mini Gote Throttle Linkage - Governor

[MiniGoteBoy]

Good day everyone, this summer I purchased a mini gote and I'm in the process of restoring it. The issue I have is the throttle mechanism at the carburetor was not connected correctly. I believe the motor has been replaced and when they installed it the linkage was not correct. The replacement motor is a 5hp briggs which is tan in color while the carburetor is bronze colored. It does have the fulcrum mechanism attached to the head of the engine.

I'd like to fix the linkage as to maintain the governor function. I've included a picture of my gote.

Thanks,

MiniGoteBoy

 

[Richard Trotter]

Kit is available on OBM Warehouse.

 

[MiniGoteBoy]

So does the gov work with their kit? Here's a picture of my setup.

 

[Richard Trotter]

So does the gov work with their kit? Here's a picture of my setup.

The kit give you direct control of the carb butterfly, no connection to the governor.

 

[creia]

The throttle kit that Richard posted work very well, however, you cannot use them with the stock Briggs 5HP governor.
Michael

 

[Joe51]

Factory correct Briggs throttle control parts for minibike applications
Briggs PN's: 261094,223169,390383,92265,691721
What they look like in upper right corner of the diagram. All available on E bay