New Project Trike

[Scottieboy]

New to the forum and need help
Looking to find out how to open this clutch to clean it and a belt that will fit. For the belts i have tried a Comet 40 belt from amazon but it seems to wide. The belt will not slip at all between the torque converters. I have went looking for information on this torque converter but i can't seem to find anything on Horstman torque converters.

 

[panchothedog]

On the driver there is a snap ring that needs to be removed. Let's see the other side of the driven, most come apart from the front. Show is a shot of the grove where the belt rides of both clutches. Maybe someone will have
an idea on the belt.

 

[Scottieboy]

Thanks for the response. I got the driven clutch apart with no issues. Really just trying to get the driver apart. Here is a look at the grove of the driver.

 

[panchothedog]

From the side picture it looks like the angle on both sheaves is the same, so that would be a 20 series belt. All of the kart websites have charts to show which belts fit based on spacing and diameter of the driven clutch. I'm my first post I mentioned the snap ring on the driver clutch which you don't
acknowledge. It will have to come off. Do you know what the snap ring is?
You will need a good set of snap ring pliers. Easy to do with the write tool.
IMPOSSIBLE to do without them. Once it is off I would imagine the three bolts also need to come off.