So I added an OldMiniBikes stage one kit to my Predator 212 (exhaust, intake and re-jet). After I changed out the jet I can't get the fuel to stop leaking from the egg shell cover on the float. Any suggestions? The round gasket is still there and the bolt only tightens so much, could it be I didn't insert the jet tight enough? Would that cause the leak? Any help would be appreciated.
Pedator 212 gas leak after jet change???
Well I pulled the engine and sat it on my truck tailgate, pulled the cover off and removed the jet and installed the second jet they sent with the kit to see if I still had a leak. With the alternate jet there is no leak, so I guess I didn't have the first jet installed tight enough? I had tried removing the cover and re-seating it after checking the gasket last night and this morning it still had a leak.
Looks like everything is good now, I just have to put the engine back on the bike and take it for a test run to see how the new set up runs!
Thanks for the help Buckeye.
Looks like everything is good now, I just have to put the engine back on the bike and take it for a test run to see how the new set up runs!
Thanks for the help Buckeye.